1 set Generator Actuator ADC120 12V with Governor ESD5500E with Pickup Sensor 3034572 For Diesel Generator
This sale include 1 piece ADC120-12V(ADC120-12) +1 piece ESD5500E+1 piece 3034572 (Please declare the Voltage of ADC120 12V or 24V.)
Actuator ADC120 + ESD5500E for ≤100KW Generator
Actuator ADC225 + ESD5500E for ≥100KW and ≤800KW Generator
The Brands mentioned here are for reference only, our parts can exactly replace the original ones.
ADC120 Gasoline Generator Actuator:
· Rotary output linear torque proportional servo
· Small, low cost, low friction model
· 1.0 lb-ft of torque, 25° rotation, < 32 msec. response
· Suitable for rotary or small inline fuel pumps of small carburetors
· Ideal for fuel systems on engines up to 150 HP
The Gasoline Generator Electric Actuator ADC120-12 is a rotary output, liner torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12, 24, or 32 volt battery supplies.
The speed of operation of the actuator is typically faster than competitive units, thus it provides more stable and rapid response to transient conditions.
Applications include most block pumps, with or without mechanical governors, distributor type pumps, and medium sized carbureted engines. The 25 degrees of rotation expands the application to a wider variety of engines.
The GAC Electric Actuator ADC120-12 is an electromagnetic servo device which can be intergrated into a closed loop control system. An engine control system can be described as follows. An electrical signal is generated by a magnetic speed sensor which is proportional to engine speed setting are not equal, a change in current from the speed control unit to the actuator will change the magnetic force in the actuator.
The rotation of the Generator Actuator ADC120-12 shaft will then adjust the fuel to the engine and cause the engine speed to be equal to the preset engine setting. Shaft rotation is proportional to the amount of actuator current and counterbalanced by the internal spring.
Since the design has no sliding parts and is totally sealed, outstanding reliability results. A single compression spring is used to improve reliability. No maintenance is necessary.
Specifications of ADC120-12 Electric Actuator:
Performance
Available Torque-------------------------------------------------------Max 1.0 lb-ft (1.4 Nm)
Maximum Operating Shaft Angular Travel----------------------- 25+-1 degree CW/ CCW
Power Input
Operating voltage-----------------------------------------------------12 VDC
Normal Operating Current------------------------------------------2 A at 12 VDCC
Maximum Current-Continuously Rated--------------------------6 A at 12 VDC,
Environmental for ADC120-12 Generator Actuator
Temperature Range--------------------------------------------------- -65℉ to 200℉(-54℃to 95℃)
Relative Humidity------------------------------------------------------up to 100%
All Surface Finishes---------------------------------------------------Fungus proof and corrosion resistant
Physical
Dimensions--------------------------------------------------------------please contact us for product catalog
Weight-------------------------------------------------------------------4.5 lbs (2.05kg), net weight
Mounting--------------------------------------------Any position, electrical connector at the top-preferred
Reliability
Vibration-----------------------------------------------------------------up to 20 G @ 50-500 Hz
Testing-------------------------------------------------------------------100% Tested
Mating Hardware
Connector (ADC120)-------------------------------------------------supplied with actuator
Level----------------------------------------------------------------------LE1500-1
Rod End Bearings ( to attach a # 10-32 THD linkage rod to the lever)-------BR100 (Right Hand)
--------BR100 (Right Hand)
Wiring Harness ADC120------------- 4 ft. harness supplied with actuator, other lengths available
**********************************************************************************************************************
Speed control unit Governor ESD5500E
TECHNICAL SPECIFICATIONS of ESD5500E Engine Speed Controller |
|||
Isochronous Operation/Steady State Stability |
± 0.25% or better |
||
Speed Range/Governor |
1K-7.5K Hz continuous |
||
Speed Drift with Temperature |
± 1% Maximun |
||
IDLE Adjustment |
160 ± 20Hz ~ 60% of set speed |
||
Droop adjustment Min.(K-L Jumpered) |
15Hz. ± 6Hz. per 1.0 A change |
||
Droop adjustment Max.(K-L Jumpered) |
400Hz. ± 75Hz. per 1.0 A change |
||
Droop Adj. Max. (K-L Jumpered) |
875Hz., ± 75Hz. per 1.0 A change |
||
Droop Adj. Min. (K-L Jumpered) |
15Hz., ± 6Hz. per 1.0 A change |
||
Speed Trim Range |
± 200Hz. |
||
Remote Variable Speed Range |
500 -7.5Hz. or all part thereof |
||
Terminal Sensitivity |
J: 100Hz., ± 15Hz/Volt @ 5.0 K Impedance |
||
L: 735Hz., ± 60Hz/Volt @ 65 K Impedance |
|||
N: 148Hz., ± 10Hz/Volt @ 1Meg. Impedance |
|||
P: 10V DC Provide @ 20ma Max. |
|||
Speed Switch Adjustment Range |
1000-10000Hz. |
||
ENVIRONMENTAL: |
|||
Ambient Operating Temperature Range |
-40°c to +85°c |
||
Relative Humidity |
up to 95% |
||
Storage Temperature |
-55°c ~ 90°c |
||
Shock |
20-100HZ 500mm/Sec. |
||
INPUT POWER: |
|||
Provide |
12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected) |
||
Polarity |
Negative Ground(Case Isolated) |
||
Power Consumption |
50mA continuous plus actuator current |
||
Actuator Current Range @ 25°c-(Inductive Load) |
Min. 2.5 Amps, Max. 10 Amps continuous |
||
Speed Sensor Signal |
0.5-120 V RMS |
||
Speed Switch Relay Contacts(N.O.and N.C.) |
10Amp |
||
PHYSICAL |
|||
Weight |
650g |
Note: The performance parameters in the frequency when measuring 4000Hz
******************************************************************************************
MPU 3034572 Specifications
Thread Size: 5/8-18 unf-2A
Tap Drill Size: 37/64 inch
Proximity to Gear Teeth: .028 in. min.-.042. in. max.
(Approximately 1/2 to 3/4 turn)
Temperature Range: -55℃to 105℃
Output at Cranking Speed: 1.5 volts AC minimum
Maximum Output: 30 volts AC
Coil Resistance: 300 ohms maximum
1. We Ship to Worldwide, except APO/FPO
2. Economic shipping by china post / ePaket... Will take longer shipping time.
3. Expedited international shipping by DHL/UPS/Fedex....
4. Orders processed timely after your payment.
5. We only ship to confirmed order addresses. Your order address MUST MATCH your address.
1.Started export since the year of 2006,with quick response to serve the oversea customers
2.Have already passed the strict quality inspection of ISO9001:2000 quality management system
3.Strong R&D Team to design and test products
4.Professional designers and technicians to provide technical assitance
5.Strict quality control process with strict standards
6.Strong installation consulting support
7.Quick after-sale technical advice and guidance.
1. Guarantee:365 days after selled.
2. During guarantee,the items share free repairs or replacement.
3. Customer is responsible for the freight come-and-go,and the custom tax.
4. You may consider to send the defective item with a economical way,and we send back the repaired items with your new order together.
5. To save the cost,pls send the item back without packing.
6. Pls provide the defective appearance and related invoice number.
7.We do not repair or replace item with an expired warranty.
8.All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email or give us a call any time.