8 Gang Touch Switch Panel On-Off Led Multi-function Pod Circuit Control Box Boat
8 Gang Control Switch Panel

Specifications:

Input Voltage : 12-24V
DC Voltage : 30A
Imax:≤60A
Pout:600W-1200W
Rated voltage:12V 20A / 24V 10A
Operating temperature: -25°-80°
Tcase: -40°-+105°
Waterproof rating:IP65
Material: ABS+PC+Aluminum
Switches Available: fog light, spot light, side light, roof light, zombie light, driving light, etc
With Adjustable Switch Panel Mount Bracket
Feature: Over-Voltage Protection, Over-Current Protection,Reverse Polarity Protection and Thermal Protection

Fit For: All 12V-24V DC Vehicles

 
 
Description:
 
- Customize Personal Panel: Customize unique personal switch panel with 50 universal switch stickers;Operating at 12 Volts;Switches 1-7 are limited to 5-20 amps,Switch 8 is limited to 30 amps.
 
- Safety First Design: Advanced thermal protection and overload protection design will help the loads work safely.Please note: Do not connect power to the power module until the 16 pin connector is plugged into the module and the ground wire is connected.
 
- Quick and Easy Installation:Clean and Neat Design-No frustrating wiring.All wires are labeled in different colors,With plug and play wiring and easy-to-install components,wihich could solve the problem of the wiring for car lights,Professional installation is highly recommended.
 
- Fitment:For jeeps Toyotas Trucks Utvs Boats Rvs Trailers Utility Trucks
 
- Package included: 8 gang switch panel,switch stickers,wiring harness, mounting accessories, installation instruction and all required mounting hardware
 
 

Installation Guide:

Total power will go to 600w at 12V, 1200W at 24V and the maximum current is 60A.
The maximum output current of groud 1 & 2 is 30A, the maximum output current of ground 3-8 is 20A. The recommended connection method is to decrease the current gradually from groud 1 to 8 groud.
Make sure all the lamps are connectly before connecting the power cable.
 
 

Guideline for connecting the red and white control cables:

1. The red cable connects the master switch power cable to the ACC. If you want to light up the LED lamps before the car start-up, please connect the recommended because the higher the power is, the more the power of the battery will be consumed.
2. The white cable is the panel light brightness control cable. It can controls 3 brightness levels by each switching. You can disconnect the white cable in order to have the most brightness swicth panel if require.
 
 

Package Included:

1 Set of 8 Gang on-off Control Switch Panel
We accept paypal,which is safe and convenient.
All products will be shipped out within 1 working day after payment is cleared.
Please make sure your shipping address and the order information is correct before placing an order.
The package will be sent out by AU Post,AU Fastway or TOLL.It normally takes 2-8 days.
Please don't leave any netrual or negative feedbacks before any communication, your kindness of willing to communicate is highly appreciated.
Please leave us with positive feedbacks and 5 star DSR (Detailed Seller Ratings) for us, it's a big praise for our work and our service .
100% customer satisfaction & FASTEST RESPONSE ON YOUR QUESTIONS are our promise and our goal!
Thanks for your purchase!
 
Swatowled9988 is a Leading Direct Supplier of Professional MOTOR CAR LED LIGHTS Systems. All products are designed with the latest Light technology accessible, affordable and user-friendly for do-it-yourself installation.
 
No need to OPEN CASE or Return Request
if problems the item you received, just mail to us, we will striving to solve any problem before you leave your feedback, appreciate your efforts indead.
If any questions regarding with Returning, our items and service, pls feel free to contact us via EBay Message. we will reply you within 1 working day.
PushAuction