Features:
. This is a 5V speaker decode board with amplifier, directly connected to the speaker, with and memory card function.
2. LIN adjustable to control external audio input volume and .
3. The potential of the panel is dual-purpose for power switch and volume adjustment.
4. 4 buttons, 0W amplifier (2*5W) with AUX, FM, USB, and .
5. Support for 4.0EDR.
6. Support USB///FM/LINE automatic switching.
7. Support MP3/WMA/WAV/FLAC format music.
8. Support USB, , MMC card for playing.
9. Support USB/ card switching, previous song, song, fast forward, fast reverse, knob volume adjustment.
0. Support FAT6, FAT32 file system.
. Supports songs of MP Layer3, MP2 Layer3, and MP3 Layer3 versions.
2. Support power-off memory function: remember the song and volume played before power-off.
Specification:
Material: ABS
Color: Silver
Working voltage: DC5V
5V (the 3.7V-5V is connected to the back of the board. If the 3.7V lithium battery is used, the 3.5DC5V hole of the panel is the input of charging)
Working current: 800MA-.2A
Output amplitude: 0W (connected to two 4 ohm 5W full-range speakers)
Panel size: 35 * 73 * 45 MM
Opening size: 7 * 54 * 45 MM
Size: 35 * 73 * 45mm / 5.3 * 2.9 * .8in
Weight: approx. 93g
Package List:
* Decode Board
Panel button description:
. "PREV/VOL-": Use a potentiometer with a switch;
2. "PLAY/PAUSE": In the USB// state, short press play/pause; in the FM state, long press the full channel search station and save the station.
3. "Upper/Slow": When USB/ playing status, press and hold for fast forward and fast reverse; in state, short press for up/down track; in FM state, short press up/down for Radio station.
4. "MODE": USB---FM-AUX Switch
5. 3.5 DC5V input (3.7V lithium battery is connected to the rear of the board, and the 3.5DC5V hole of the panel is the input of charging)
6. 3.5 AUX for audio input
Note:
. If it is not a smartphone (), enter the password 0000.
2. If the input voltage of this decoder board is too high, it will be damaged. If the voltage is too low, it will not work properly. Be careful not to connect the wrong "+" and "-" poles; please pay attention to the voltage and current values.
3. The device name of this product is YMX-88BT or YMX-89BT.