Description:
This Wireless Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours. The unit continuously monitors voltage, charge or discharge current, number of power, prevent over charge or over discharge, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure.
Read your battery bank like a fuel gauge.
Battery Status At A Glance.
Charging status indicator, looks like a smartphone.
Combines many functions in one, Dual display
Voltage (V), Current (A), Capacity (AH)
Power (W/KW), Energy (KWH)
Temperature (C), Working Hours (H)
By turning External device/Relay on and off, it can control external devices, such cut off Power input.
Trigger external Relay (Not included) when the reading reach preset value.
[OVP] Over Charge Voltage protection
[LVP] Over Discharge Voltage protection
[OCP] Over Discharge Current protection
[NCP] Over Charge Current protection
Come with a Through-hole Current transformer, it doesn't require shunt.
The current sensor can be placed on the Positive or Negative side of power.
Reverse polarity protection.
Doesn't require isolated power, self-powered 6-80V.
Nondestructive installation, it is very easy to install.
This Wireless Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours. The unit continuously monitors voltage, charge or discharge current, number of power, prevent over charge or over discharge, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure.
Read your battery bank like a fuel gauge.
Battery Status At A Glance.
Charging status indicator, looks like a smartphone.
Combines many functions in one, Dual display
Voltage (V), Current (A), Capacity (AH)
Power (W/KW), Energy (KWH)
Temperature (C), Working Hours (H)
By turning External device/Relay on and off, it can control external devices, such cut off Power input.
Trigger external Relay (Not included) when the reading reach preset value.
[OVP] Over Charge Voltage protection
[LVP] Over Discharge Voltage protection
[OCP] Over Discharge Current protection
[NCP] Over Charge Current protection
Come with a Through-hole Current transformer, it doesn't require shunt.
The current sensor can be placed on the Positive or Negative side of power.
Reverse polarity protection.
Doesn't require isolated power, self-powered 6-80V.
Nondestructive installation, it is very easy to install.
| Power Supply | 6~60V (external power supply) |
| Voltage Range | 0.01~120V (external power), 6.00~80.0V (internal power) |
| Current Range ¹ | depend on the size of hall sensor [1] |
| Capacity Range | 0.001~65000.00 AH |
| Energy Range | 0.000~9999 KWH |
| Time Range | 0~100 Hours |
| Power Range | 0~999 KW |
| Temperature | 1~100 degree centigrade |
| Display Type | 2.4 inch LCD |
| Sampling rate | 5 readings per second |
| Accuracy | Volt ±1%+2 byte / Amp±2%+5 byte |
| Dimensions of Display | 87mm×49mm×14mm |
| Size of measuring module | 114mm×54mmx28mm |
Deal for use with
Used in cars, boats, motorcycle and Testing Devices for measuring voltage and current, Ah etc
Battery Protection, Prevent Over Discharge/Over Charge.
Used for Solar, Wind, HHO System
DIY battery discharge device.
Solar, Wind, HHO System
Used for Solar, Wind, HHO System
DIY battery discharge device.
Solar, Wind, HHO System
Package Included:
1PC×2.4 inch LCD Display (Receiver)
1PC×Measuring module (Emitter)
1PC×Hall sensor
1PC×Cable
1PC×English operation manual
1PC×2.4 inch LCD Display (Receiver)
1PC×Measuring module (Emitter)
1PC×Hall sensor
1PC×Cable
1PC×English operation manual
Am 31.12.20 hat der Verkäufer die folgenden Angaben hinzugefügt: