1 set Generator Actuator ADC225 12V with Governor ESD5500E with Pickup Sensor 3034572 For Diesel Generator

This sale include 1 piece ADC225-12V(ADC225-12) +1 piece ESD5500E+1 piece 3034572 (Please declare the Voltage of ADC225  12V or 24V.)

Actuator ADC120 + ESD5500E for ≤100KW Generator

Actuator ADC225 + ESD5500E for ≥100KW and ≤800KW Generator

The Brands mentioned here are for reference only, our parts can exactly replace the original ones.

 

 

 

Generator Actuator ADC225-12 Series :

· 2.2 lb-ft of torque, 25° rotation, < 45 msec. response

· Low cost, versatile model

· Suitable for multi-plunger fuel pumps and medium size carburetors

· Various models offer a variety of connectors and wiring harnesses, including feedback sensor

· Outstanding reliability and performance

The Engine Actuator ADC225-12 is a rotary output, liner torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12, 24, or 32 volt battery supplies.

The speed of operation of the actuator is typically faster than competitive units, thus it provides more stable and rapid response to transient conditions.

Applications include most block pumps, with or without mechanical governors, distributor type pumps, and medium sized carbureted engines. The 25 degrees of rotation expands the application to a wider variety of engines.

The ADC225-12 Engine Actuator is an electromagnetic servo device which can be intergrated into a closed loop control system. An engine control system can be described as follows. An electrical signal is generated by a magnetic speed sensor which is proportional to engine speed setting are not equal, a change in current from the speed control unit to the actuator will change the magnetic force in the actuator.

The rotation of the actuator shaft will then adjust the fuel to the engine and cause the engine speed to be equal to the preset engine setting. Shaft rotation is proportional to the amount of actuator current and counterbalanced by the internal spring.

Since the design has no sliding parts and is totally sealed, outstanding reliability results. A single compression spring is used to improve reliability. No maintenance is necessary.

SPECIFICATIONS of Generator Actuator ADC225-12 ADC225-24

PERFORMANCE of ADC225-12 ADC225-24 Generator Actuator
Available Torque:	Max1.0Lb-ft(1.4Nm)
Maximum Operating Shaft Angular Travel:	25+1° CW/CCW
POWER INPUT:
Operating voltage:	12V DC
Normal Operating Current:	2 A at 12V DC,1A at 24V DC
ENVIROMENTAL for GAC Actuator ADC225S-12
Temperature Range:	-54 to 95°c
Relative Humidity:	up to 100%
All Surface finishes:	Fungus proof and corrosion resistant
PHISICAL:
Weight:	3.8 kg
Mounting:	Any position, electrical connector at the top preferred
RELIABILITY:
Vibration:	up to 20G @50-500 Hz
Testing:	100% Tested
MATING HARDWARE:
Lever:	LE1500-2
Rod End Bearings(to attach a 12#20 HD linkage rod to lever):	BR200(Right Hand)
	BR201(Right Hand)
Wiring Harness HD225:	supplied with actuator

 

 

**********************************************************************************************************************

Speed control unit Governor ESD5500E

TECHNICAL SPECIFICATIONS of ESD5500E Engine Speed Controller
Isochronous Operation/Steady State Stability	± 0.25% or better
Speed Range/Governor	1K-7.5K Hz continuous
Speed Drift with Temperature	± 1% Maximun
IDLE Adjustment	160 ± 20Hz ~ 60% of set speed
Droop adjustment Min.(K-L Jumpered)	15Hz. ± 6Hz. per 1.0 A change
Droop adjustment Max.(K-L Jumpered)	400Hz. ± 75Hz. per 1.0 A change
Droop Adj. Max. (K-L Jumpered)	875Hz., ± 75Hz. per 1.0 A change
Droop Adj. Min. (K-L Jumpered)	15Hz., ± 6Hz. per 1.0 A change
Speed Trim Range	± 200Hz.
Remote Variable Speed Range	500 -7.5Hz. or all part thereof
Terminal Sensitivity	J: 100Hz., ± 15Hz/Volt @ 5.0 K Impedance
	L: 735Hz., ± 60Hz/Volt @ 65 K Impedance
	N: 148Hz., ± 10Hz/Volt @ 1Meg. Impedance
	P: 10V DC Provide @ 20ma Max.
Speed Switch Adjustment Range	1000-10000Hz.
ENVIRONMENTAL:
Ambient Operating Temperature Range	-40°c to +85°c
Relative Humidity	up to 95%
Storage Temperature	-55°c ~ 90°c
Shock	20-100HZ 500mm/Sec.
INPUT POWER:
Provide	12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
Polarity	Negative Ground(Case Isolated)
Power Consumption	50mA continuous plus actuator current
Actuator Current Range @ 25°c-(Inductive Load)	Min. 2.5 Amps, Max. 10 Amps continuous
Speed Sensor Signal	0.5-120 V RMS
Speed Switch Relay Contacts(N.O.and N.C.)	10Amp
PHYSICAL
Weight	650g

Note: The performance parameters in the frequency when measuring 4000Hz

******************************************************************************************

MPU 3034572 Specifications

Thread Size: 5/8-18 unf-2A

Tap Drill Size: 37/64 inch

Proximity to Gear Teeth: .028 in. min.-.042. in. max.

(Approximately 1/2 to 3/4 turn)

Temperature Range: -55℃to 105℃

Output at Cranking Speed: 1.5 volts AC minimum

Maximum Output: 30 volts AC

Coil Resistance: 300 ohms maximum

 

1. We Ship to Worldwide, except APO/FPO

2. Economic shipping by china post / ePaket... Will take longer shipping time.

3. Expedited international shipping by DHL/UPS/Fedex....

4. Orders processed timely after your payment.

5. We only ship to confirmed order addresses. Your order address MUST MATCH your address.

 

1.Started export since the year of 2006,with quick response to serve the oversea customers

2.Have already passed the strict quality inspection of ISO9001:2000 quality management system

3.Strong R&D Team to design and test products

4.Professional designers and technicians to provide technical assitance

5.Strict quality control process with strict standards

6.Strong installation consulting support

7.Quick after-sale technical advice and guidance.

 

1. Guarantee:365 days after selled.

2. During guarantee,the items share free repairs or replacement.

3. Customer is responsible for the freight come-and-go,and the custom tax.

4. You may consider to send the defective item with a economical way,and we send back the repaired items with your new order together.

5. To save the cost,pls send the item back without packing.

6. Pls provide the defective appearance and related invoice number.

7.We do not repair or replace item with an expired warranty.

8.All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email or give us a call any time.