Product Dimension:

Feature:

1) According to the original factory specifications.

2) Apply to both sides of the body.

3) Replace without leaving traces not reflective.

4) Extension is better, not easy to brittle broken, paste when can be clearly felt.

5) High temperature resistant, surface antifouling UV coating, lustrous, texture like car paint, waterproof sunscreen.

6) Material color correction, paste after feeling very firm, more have model.

Installation Method:

1) Clean the body and keep it dry.

2) Confirm the location that needs to be posted. In general, slowly stick on one side, scrape flat with tools, and expose the paper.

3) If the graphics are not large enough, the transparent transfer film and stickers can be torn off and pasted. But care must be taken to avoid accidental adhesions.

4) Paste well, then repeatedly scrape several times. Tear the transparent transfer film.

5) In the car door and sewing with a knife, wrap it inside.

6) Do not let the car stickers and body have any separation or protuberance.

Matters Needing Attention:

1) Don't wax the sticker a week before you decide to dress up your car. The film should not be applied when the car is hot. The car must be cleaned and put on the back one.

2) Do not wash your car within a week. It is recommended not to be exposed to the sun within 24 hours. Do not wash your car within three days after pasting. Do not paste on rainy days.

3) If the sticker needs to be pasted on the crack of the door or other places that need to be moved, don't worry, just cut it with a sharp knife after it is pasted.

4) If you really don't want to do anything, please go to the place where the solar membrane is put on and ask for help.

5) Gently scrape the edges of the sticker with your fingernails and tear it off completely, leaving no marks or damage to the paint. In winter, if it is too cold to scrape the corners, a hair dryer can be used to tape the paper.

6) Heat it up properly, and it can be easily removed after melting.