Sophisticated product, please handle with care; quality first, credit upmost;  Your satisfaction is our pursuit;The strength of technology decide the quality of technology.                                         if  you have any problem,pls contact with us.

15cmx2m/ 30cmx1m/ 30cmx5m PCB Photosensitive Circuit Photoresist Sheets Dry Film

15cmx2m
Features:
Photographic film, also known as dry film, is used to make PCB board, stick it on top of the PCB, it will become a sensitive circuit board.
Suitable for plating, hole covering,and the etching process.
Excellent ability to cover holes
High Resolution
Excellent adhesion to almost all surfaces
Image clarity after exposure
Front-panel is very clean after developed
Size: 15 x 200 cm / 5.91'' x 78.74''
Color: As pictures shown
 
How to use it :
1. Clean your board. Cut dry film a little larger than your board.
2. Apply Resist: This Photoresist has 3 layers, the top and bottom layers are clear protective layer, so at the first, you need remove one protective layer, the easy way is to use two small pieces of scotch tape. Then apply the middle layer on board.
3. Expose: Place your negative artwork over the rest protective layer.
4. Develop: Remember: you need NEGATIVE film developer, Remove the rest protective layer on the film. After 3 minutes take board out of developer and hold under running water to check,you can always place it back in the developer if needs more time.

Etching
The dry film is resistant to most of the acid etching solution, the PH value can be resistant to most alkaline etching solution between PH8.0 ~8.5.
Cover hole
1.5 mil dry film can fully cover a 0.25 inches thickness hole.
Plating
The dry film is available in most common use of the plating bath, no wrinkles, no color.

Note:
Lighting, display and other factors may cause COLOR SHADING, please comprehensive pictures and text descriptions to determine!

Package Included:
1 x photosensitive dry film
 
 
30cmx1m


Features:
Universal used in producing PCB board, attach on the PCB surface to make it photosensitive.
Suitable for electroplating, hole covering and etching.
Great hole covering ability.
High resolution.
Great adaptive capacity to different material.
Durable in pH 8.0-8.5 situation.
1.5mil dry film fully covers a 0.25inch height hole.
Suitable for usual plating bath, no wrinkle or color error.
Specification:
Width: approx. 30cm / 11.81"
Length: approx. 100cm / 39.37"
Operating Steps:
1. Remove the cover.
2. Clean the surface, then attach the film carefully, be sure to make it flat and leave no air.
3. Iron the film slightly to fix it.
4. Print the PCB film to ensure precision, or use parchment paper instead.
5. Put the printed pattern on the photosensitive board to expose. The dry film will turn into deep blue from light blue.
6. Develop: Remove another film, put it into developer water. Wipe the board when developing. (1 developer water: 100 water)
7. Etch.
8. Demould after etching is finished. Put the board into demoulding water for several minutes. (1 demoulding water: 60/70 water)
 
Note:
Lighting, display and other factors may cause COLOR SHADING, please comprehensive pictures and text descriptions to determine!
Package Included:
1 x Photosensitive Dry Film
 

30cmx5m
Features:
Photographic film, also known as dry film, is used to make PCB board, stick it on top of the PCB, it will become a sensitive circuit board.
Suitable for plating, hole covering，and the etching process.
Excellent ability to cover holes
High Resolution
Excellent adhesion to almost all surfaces
Image clarity after exposure
Front-panel is very clean after developed

Etching
The dry film is resistant to most of the acid etching solution, the PH value can be resistant to most alkaline etching solution between PH8.0 ~8.5.

Cover hole
1.5 mil dry film can fully cover a 0.25 inches thickness hole.

Plating
The dry film is available in most common use of the plating bath, no wrinkles, no color.

Package Included:
1 x Photosensitive Dry Film

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

 

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

 

1. If you have any questions, please feel free to email our service specialists.

2.Just contact us using the " Ask the seller a question" link on eBay.

3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

15cmx2m/ 30cmx1m/ 30cmx5m PCB Photosensitive Circuit Photoresist Sheets Dry Film
15cmx2m
Features:
Photographic film, also known as dry film, is used to make PCB board, stick it on top of the PCB, it will become a sensitive circuit board.
Suitable for plating, hole covering,and the etching process.
Excellent ability to cover holes
High Resolution
Excellent adhesion to almost all surfaces
Image clarity after exposure
Front-panel is very clean after developed
Size: 15 x 200 cm / 5.91'' x 78.74''
Color: As pictures shown
 
How to use it :
1. Clean your board. Cut dry film a little larger than your board.
2. Apply Resist: This Photoresist has 3 layers, the top and bottom layers are clear protective layer, so at the first, you need remove one protective layer, the easy way is to use two small pieces of scotch tape. Then apply the middle layer on board.
3. Expose: Place your negative artwork over the rest protective layer.
4. Develop: Remember: you need NEGATIVE film developer, Remove the rest protective layer on the film. After 3 minutes take board out of developer and hold under running water to check,you can always place it back in the developer if needs more time.

Etching
The dry film is resistant to most of the acid etching solution, the PH value can be resistant to most alkaline etching solution between PH8.0 ~8.5.
Cover hole
1.5 mil dry film can fully cover a 0.25 inches thickness hole.
Plating
The dry film is available in most common use of the plating bath, no wrinkles, no color.

Note:
Lighting, display and other factors may cause COLOR SHADING, please comprehensive pictures and text descriptions to determine!

Package Included:
1 x photosensitive dry film
 
 
30cmx1m


Features:
Universal used in producing PCB board, attach on the PCB surface to make it photosensitive.
Suitable for electroplating, hole covering and etching.
Great hole covering ability.
High resolution.
Great adaptive capacity to different material.
Durable in pH 8.0-8.5 situation.
1.5mil dry film fully covers a 0.25inch height hole.
Suitable for usual plating bath, no wrinkle or color error.
Specification:
Width: approx. 30cm / 11.81"
Length: approx. 100cm / 39.37"
Operating Steps:
1. Remove the cover.
2. Clean the surface, then attach the film carefully, be sure to make it flat and leave no air.
3. Iron the film slightly to fix it.
4. Print the PCB film to ensure precision, or use parchment paper instead.
5. Put the printed pattern on the photosensitive board to expose. The dry film will turn into deep blue from light blue.
6. Develop: Remove another film, put it into developer water. Wipe the board when developing. (1 developer water: 100 water)
7. Etch.
8. Demould after etching is finished. Put the board into demoulding water for several minutes. (1 demoulding water: 60/70 water)
 
Note:
Lighting, display and other factors may cause COLOR SHADING, please comprehensive pictures and text descriptions to determine!
Package Included:
1 x Photosensitive Dry Film
 

30cmx5m
Features:
Photographic film, also known as dry film, is used to make PCB board, stick it on top of the PCB, it will become a sensitive circuit board.
Suitable for plating, hole covering，and the etching process.
Excellent ability to cover holes
High Resolution
Excellent adhesion to almost all surfaces
Image clarity after exposure
Front-panel is very clean after developed

Etching
The dry film is resistant to most of the acid etching solution, the PH value can be resistant to most alkaline etching solution between PH8.0 ~8.5.

Cover hole
1.5 mil dry film can fully cover a 0.25 inches thickness hole.

Plating
The dry film is available in most common use of the plating bath, no wrinkles, no color.

Package Included:
1 x Photosensitive Dry Film

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

 

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

 

1. If you have any questions, please feel free to email our service specialists.

2.Just contact us using the " Ask the seller a question" link on eBay.

3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

Am 11.12.21 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques