ELM327 USB V1.5 modified for Ford ELMconfig CH340+25K80 chip HS-CAN / MS-CAN

Supported software:

ELMconfig

For--scan

FOCCCUS

FF2

Please note:

1: ELMconfig special - speed set to 500kbit - FoCCCus FF2

2: MS-CAN support (MS-CAN / HS-CAN switch)

3: HS-CAN mode can reach 500000 baud (500kBit) rate(* Constant speed set to 500000 baud (500 kbit))

Note: The Driver is for 32 /64 bit Windows.

Compared with ordinary ELM327 USB Diagnostic Cable, our For--scan Cable can be used as two different tools：

1. It can be equipped with ordinary ELM327 software to do ordinary ELM327 functions. It can be equipped with scanmaster, scantool and other software, applicable to all car series (For--scan ELM327 and For--scan pro can be used, ELS27 can not)

2. Supporting FOR--SCAN, ELMconfig, FOCCCUS, FF2 software, specially designed for Ford series, Mazda, Lincoln and Mercury cars (ELS27 can only use these software)

Supported models：

All Ford(Cars & Fseries Trucks 12V), Mazda, Lincoln, Mercury vehicles .

It is 99% of models after 2000 and around 92% of models after 1996 (the year when OBD2 became a standard in USA).

Note: New 2019+ Mazda 3 and CX-30 are not supported yet. 

Why do you need an Extend license？
1. This license is not restricted by us, it is restricted by the for--scan software provider
2. Used to restrict access to key functions. For example, PATS key programming function. If the software is completely released, all the software and the For--scan ELM327 cable can program a new car key in a few seconds. This is too insecure for all users.

Those modules need Extend license：
Service -> PATS Programming
Configuration and Programming -> Module Configuration
Configuration and Programming -> Module Configuration(AS BUILT format)
Configuration and Programming -> Central Configuration
Configuration and Programming -> Module Reset/Configuration (required to learn central configuration changes related to these modules)

1. With best PIC18F25K80 Chip:

2. Add functionality for Ford cars, Even support hidden function for ford Focus Mondeo Kuga.

(Hidden function Support car list: 2006-2016 classical for Focus , 2012-2015 new for Focus , 2013-2015 Kuga)

3. Powerful Softwares Compatible:FOR--Scan, Elmconfig, FF2 and FoCCCus, Scanmaster plus more

4. Special Design with Switch : connect different CAN buses , such as MS CAN bus and HS CAN bus

5. Drivers and instructions included,Easy to install.

6. The most stable Hardware V1.5 , Support all OBD2 Protocols

7. Supported Langauges:
-----When starting HS function, it supports 12 Languages:

English,Czech,Danish,German,French,Spanish,Hungarian,Italian,Polish,Turkish,Serbian,Croatain
-----When starting MS CAN function, it supports Language: English & Russian.

8

9. Supported cars:

Especially for Ford, for Mazda, for Lincoln, for Mercury vehicles And other OBD2/EOBD universal car models.

10. Supported protocols:

for FORD HS CAN

for FORD MS CAN

SAE J1850 PWM(41.6Kbaud)

SAE J1850 VPW(10.4Kbaud)

ISO9141-2(5 baud init,10.4Kbaud)

ISO14230-4 KWP(5 baud init,10.4 Kbaud)

ISO14230-4 KWP(fast init,10.4 Kbaud)

ISO15765-4 CAN(11bit ID,500 Kbaud)

ISO15765-4 CAN(29bit ID,500 Kbaud)

ISO15765-4 CAN(11bit ID,250 Kbaud)

Advantages:

Functions:

* read/erase fault codes from ALL modules, including OBD2/EOBD

* access modules on both HS-CAN and MS-CAN mode

* read vehicle configuration

* actuator tests

* Live Data

* injector coding

* software updates

* service procedures

* force DPF regeneration

* programming

* coding

* adaptations

• Read and clear diagnostic trouble codes
• Air Flow Rate
• Display and read
• Engine RPM
• Vehicle Speed
• Intake Air Temperature
• Long Term Fuel Trim
• Short Term Fuel Trim
• Timing Advance
• Oxygen Sensors
• Fuel System status
• and so much more!

ELM327 USB Switch Support Car List:

For FORD

For MAZDA

For BMW

For VW

For

For AUDI

For CHEVY

For TOYOTA

For LEXUS

For Lincoln

For MERCEDES

For Mercury

For HYUNDAI

For KIA

For MITSUBISHI

For NISSAN

For SUZUKI

For JAGUAR

For LAND ROVER

For CHRYSLER

For HONDA

AND SO MUCH MORE!

Modified EML:

Please note that many for Ford and for Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.

ELM327 supports HS CAN from the stock, because for Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.

Pin Configurations

Switch position one: HS CAN - Occupies pins 6 and 14

Switch position two: MS CAN - Occupies pins 3 and 11

ELM327 USB Switch Packing List:

1*ELM327 USB Switch