Preparation: Remove loose, decayed or very soft wood until a fairly sound base is exposed. Rustins Wet Rot Wood Hardener is moisture-hardened, however the wood should be reasonably dry and free from grease, dirt and oil.
Application: Shake well before use. Apply liberally by brush, saturating the wood. Wait until each coat has been absorbed by the wood and reapply. Ideally this should be done as a continuous process for maximum penetration depending on the absorbency of the wood. Continue with repeated applications until a surface film is formed.
Coats: Multiple coats. This is a continuous application process, (see above).
Drying Time: 5 minutes, (see above). Allow a minimum of 2 hours before applying Rustins Wood Filler over Rustins Wet Rot Wood Hardener or until hardener film becomes fairly touch-dry.
Re-coating Time: 5 minutes, (see above). Allow a minimum of 2 hours before applying Rustins Wood Filler over Rustins Wet Rot Wood Hardener or until hardener film becomes fairly touch-dry.
Application Temp: Ideally between 15-25ºC. Do not apply below 10ºC.
Coverage: Not applicable. Dependent on condition of rotting wood.
Compatibility: Avoid contact with metal, glass, plastic and painted surfaces.
Settlement: Shake well before use.
Shelf-life/Storage: Many years if suitably stored unopened in original container. NOTE; this is a moisture-hardened product so storage life of opened tins is limited.