4 Port PCI-E to USB 3.0 adapter

100% brand new and high quality
A super fast and high-capacity data transfer solution.
Stable and reliable VIA Chipset .
Compliant with USB 3.0 specification Revision 1.0 .
Compatible with USB 2.0 & 1.1 specification.
Compliant with Single-Lane (x1) PCI-Express throughput up to 5Gbps.
Supports 2.5Gbps PCI-E bus with full duplex channel.
4 USB 3.0 type A female connectors available.
Plug & play and hot swapping capability.
Bus-powered mode and no external power required for most of peripherals.
4-pin power connector available for some high current consumption peripherals, like HDD.
Support Windows XP / Vista /Win7/8/10 Server 2008 or later
Device Type: 4 Port USB 3.0 HUB PCI-E Adapter
Interface Type: USB 3.0
Data Transfer Rate: 5.0 Gbps
Product Size:(L*W*H) 12.00*6.60*1.90cm/4.72"*2.60"*0.75" (Approx.)
Quantity:1Set
Note:
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1PC*4 Port USB 3.0 HUB PCI-E Adapter

Mini PCI-E to USB 2.0 Adapter

100% brand new and high quality
This adapter is for converting Mini PCIe slot to USB2.0 interface, Backward compatible with USB1.1(Not compatible with USB3.0)
Expand a standard USB interface through Mini PCIe port,can connect USB2.0 devices
Expanded USB port can connect USB flash disk,USB Bluetooth adapter,WIFI adapter, etc.
Conform to USB2.0 standard, compatible with USB1.1
Suitable for Mini PCIe port and "mini PCIe" port of ASUS EeePC 900,901,902 series
Specifications:
Full size: Approx. 51*29*7mm(L*W*H)
Color: Green
Net Weight: 4g
Package Included:
1PC*Mini PCI-E to USB 2.0 Card Adapter

Mini PCI-E to USB 3.0 Adapter

100% brand new and high quality
Main chip: NEC UPD720202 chipset
May have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times
Backward compatible with USB2.0, USB1.1, USB1.0
Transfer Rate: 5000/480/12 / 1.5Mbps
SATA to take power by the board, or you can into a small 4PIN power. (To change, please contact customer service)
Built-in 19-pin can turn out two USB3.0 ports
Compliance with PCI-Express Specification Revision 2.0
Compliance with xHCI specification version 1.0
Compliance with USB3.0 SuperSpeed specification version 1.0
USB support hot swap function
Support Windows XP / 2003 / Vista / win7 / win8 / 2003 / linux, can provide LINUX drivers.
Note:
Mini PCI-E because without a 5V power supply, not directly to the USB-powered, so it can be inserted using the SATA power cable to work properly!
This expansion card can only be plugged into the MINI PCI-E interface, can not be used MSATA interface. Please make sure when buying interface, or can not work
Because the first half of NEC 2010 merged with Renesas Electronics, Renesas Electronics accounted for a large share, so now have to drive and LOGO RENESAS. Please know!
On the chip and printed CHINA JAPAN, this is just the chip package in China or Japan, which is still JAPAN wafer production, performance exactly the same, no difference
USB3.0 is double total 20PIN, which has one foot already needle injection foolproof, so called 19PIN.
Please buyers in the purchase be sure to see the notes and instructions below to purchase! !
Because SATA Docking Station are plastic, not iron, so the line is relatively tight, when the harness must withstand plug the cable back transposons, forced plug wire when the transposon will tilt. Remember Remember!
Product advantages:
Association boss using NEC USB3.0 controller chips, is the third generation of products D720202 2 master
The market can only support LINUX system expansion card
Expansion card using Taiyo Yuden capacitance, greatly ensure the stability of USB-powered
Working directly with the original, you can provide a strong after-sales technical support, firmware and driver updates earliest. Parents and worry-free card
Product use:
With USB3.0 popularity, more and more chassis provides 20pin USB3.0 interface, there are many DIY enthusiasts to achieve self-install the front panel 20pin USB3.0 interface! MINI PCIE motherboard directly out 19PIN socket interface extensions, you can connect the front panel of the chassis, thus providing ultra-high-speed USB3.0 interface front, very convenient!
Driver Installation Instructions:
The accompanying CD into the CD-ROM into the NEC directory --D720201-2-- Double-click the .exe file inside the next step. When prompted, reboot the computer
As previously installed driver, first in the Control Panel Add or Remove Programs --- - Renesas Electronics USB3.0 Host ControllerDriver uninstall and re-install
Size: 5.1 x 3cm/2*1.18"
Package Included:
1PC*Adapter Expansion Card
4PCS*Screws