SNOOKER POOL CUE TIP 
Replacement Blue Leather 
Various Sizes & Quantity

  • Pool, Snooker, Billiards
  • Made from leather they're impregnated with chalk dust to reduce mis-cueing.
  • Ready chalked Blue. (shade of blue may vary)
  • Recommended for ages 14+
  • To replace your tip follow these instructions.
  • Use a razor blade, sharp knife, or pliers to either cut or pull off the old tip from the end of the cue. The cue tip is made entirely from leather, and is located at the end of your pool cue on top of the ferrule, which is the metal ring or cap located just under the tip.
  • Scrape off any remaining old glue from the ferrule using your blade or knife.
  • Use 60 to 80 grit sandpaper to sand down and smooth the end of the pool cue to make the surface as even as possible.
  • Apply a small amount of nail polish remover to a paper towel. Nail polish remover contains acetone, which is a solvent that will help remove and dissolve any remaining glue and leftover residue from the old tip.
  • Wipe any remaining residue from the cue tip and bottom shaft areas using the paper towel to prepare for the installation of a new pool cue tip.
  • Place the new tip flat side down on a piece of 400 to 600 fine grit sandpaper.
  • Use slight, but even pressure to sand the tip using the sandpaper until the tip is smooth on the back side.
  • Place the tip on the end of the cue to verify that the tip lies flat across the top of the ferrule.
  • Apply a few drops of glue to the top of the pool shaft. The glue should be able to completely cover the tip at the time the cue tip is applied.
  • Place the cue tip flat side down on the shaft and make adjustments as necessary so that the tip lines up in the centre.
  • Use a paper towel to wipe away any glue residue that escapes from the sides of the cue tip and shaft.
  • Allow the shaft to sit for at least one hour or until the glue dries.
  • Use the fine grit sandpaper to gently sand the edges of the tip to make it smooth for billiards play.
  • Use sandpaper or a tip shaper tool to shape the cue as desired. Your pool cue will now be ready for use.

              • Please Note!
                Colours and textures may vary, due to differences in the device used, to view the image.
                Please allow for small errors in any measurements, due to manual measuring methods.
              • All orders are quickly packed and dispatched, using ♻ re-purposed or recycled materials  wherever possible. 

              • See my ebashop for more Cue Tips, Accessories and