Working Voltage: AC85V-265V 50HZ

Ambient temperature: -20 ℃ ~ + 50 ℃

Their power consumption: ≤0.2W

Load type: Energy-saving lamps, LED lights, etc.

Load power: Energy-saving lamps ≤ 200W ≤ LED ≤ 50W

Delay time: 30S~60S

Feeling distance: 5-8M

Light sensitivity: 3-8LUX

lnduction angle: 180x360 °, Front hemisphere

Detection speed: 0.6-1.5 m / sec

Dimensions: length 60* width 28* thickness 23mm

Feature：


Radar switch sensing distance far enough, wide angle, no dead zone, can penetrate glass, and thin wood, depending on the power and can penetrate walls of different thicknesses, from the environment, temperature, dust and other effects, in the case of more than 37 degrees , the sensing range is not shortened, the temperature sensing distance becomes constant. I hope sensing angle a small point, you can set the switch sides of the metal obstruction, or choose our restaurant infrared body sensor switch. Radar can pass through walls of 25cm hollow home.

1. Smart sensor: When someone enters the detection range of the product, the microwave detector operating point lights when people leave the detection range, the light automatically goes off. It can automatically identify day and night.
2. Smart delay: switch after detecting the human body every activity will be automatically extended cycle, and extended time of the last human activities as the starting point.
3. Work: After induction switch is turned on, the delay period, if human activity, the switch will continue on until people leave and extended time.
The photosensitive control: according to the outside light intensity, to control the switch is working to achieve energy savings.


Use: hallway, corridor, basement, garage, storage, monitoring and other indoor (outside) energy-saving automatic lighting situations

Note：


1. Disable charged install and operate, load short circuit is strictly prohibited. (Be sure to regulate their own power before the switch, or peril)
2. Do not exceed the load power usage.
3. When the wall thickness of less than 10 cm, the switch is likely to partition induction.
4. In the sensitive area, do not affect its non-stop movement of an object or obstacle detection.
5.When install, metal objects blocking the sensor is prohibited.