(DC18RC 3A With LCD Display)
Features:
INPUT: 100V~240V 50-60Hz
OUTPUT: 18V/14.4V 3A double pulse charging
safety protection
When the music sounds to prove that the communication test is successful, the red light is on to indicate normal charging. The screen displays the current remaining battery power, voltage and current. When the red and green lights are on at the same time, it means that the battery has been charged to 80-90%. Please check whether the battery is normal. The red light flashes to warn of high battery temperature, please wait for the temperature to drop before charging
Steady green light indicates that it is fully charged
This charger has a repair wake-up function. The over-discharged battery charger will perform a half-hour repair test. If the battery is not broken, the repair can reach 90% of the repair success.
packing list
1. 1 DC18RC charger with screen
2. 1 copy of instruction manual
(DC18RC 3A No LCD Display)
Features:
Input: 100-240V AC, 50-60HZ
No load voltage: 0 V.
Charging method: CC-CV
Efficiency: ≥85%
Protective function:
Stop when a charger failure is detected
Automatically cut off when charging a defective battery is detected as a short circuit
Temperature: stop charging when overheated
As time goes by: stop charging when charging time ≥236 minutes
LED indication:
Standby: Green flashes at 1 Hz
Charging: red light on-battery capacity Red and green lights are on-battery capacity ≥80%
100% charged-green light on
Stop charging after working overtime-green light on
Battery failure-red and green indicator lights flash 1 Hz
Short circuit-red light flashes 3 Hz
Charger failure: red and green indicator lights flashing 3 Hz
Net weight: about 604g (not including packaging)
Working environment: temperature: 0~40℃
Humidity: ≤85%
Air pressure: 86 Kpa-106 Kpa
Storage and transportation environment: temperature: -20℃~65℃
Humidity: ≤90%
Air pressure: 70~106Kpa +
Package Contents:
Replace MAKITA battery charger 14.4V-18V output 120V, suitable for Makita BL1830 BL1815 BL1840
Broad compatibility:
The charging voltage of Makita Li-ion battery is 14.4V to 18V
Fully compatible with makita 14.4V and 18V batteries, BL1830 BL1840 BL1850 BL1815 BL1430 BL1415
Important reminder:
Smart charger 14.4V-18V 3A has power display, temperature control protection, out-of-date protection, intelligent single battery detection (please look for single battery detection, the new EU regulations must single battery detection) effectively protect each battery.
Working voltage 100-260V Working frequency 50/60HZ Six-level energy efficiency Energy Star driver IC. Smart shutdown!