MLR TUBO INIEZIONE CARBURANTE INTRECCIATO IN ACCIAIO INOX AD ALTA PRESSIONE
ID 8 mm
ADATTO A:
Sistemi di iniezione del carburante e carburatore
DISPONIBILI ANCHE ALTRI TUBI E RACCORDI - SI PREGA DI VEDERE I NOSTRI ARTICOLI DEL NEGOZIO
PREZZO AL METRO (venduto come una lunghezza non tagliata) 1 ARTICOLO = 1 METRO
SPECIFICA TUBO:
Tipo: treccia in acciaio inossidabile
Interno: tessuto intrecciato su tubo in gomma nera resistente al carburante
Diametro interno: 7,5 mm
Diametro esterno: 13,5 mm (circa)
Intervallo di temperatura: da -30°C a +50°C (carburante)
Adatto per: benzina/olio/acqua/aria
Pressione di esercizio: 100 psi (7 bar)
Pressione di prova: 290 psi (20 bar)
Pressione di scoppio: 435 psi (30 bar)
Norme: DIN 73379 (3/82)
Lunghezza massima del rotolo: 20 m
Per tagliare il tubo: avvolgere strettamente il nastro adesivo attorno al tubo, sostenerlo in una morsa e tagliare con un seghetto affilato a denti fini
Progettato per l'uso negli sport motoristici. Non sono incluse istruzioni
L'immagine mostra cosa riceverai se acquisti questo articolo
INFORMAZIONI IMPORTANTI:
La maggior parte delle nostre inserzioni ha una serie di opzioni di spedizione: seleziona il servizio richiesto PRIMA dell'acquisto. Se hai selezionato un servizio di affrancatura con un numero di tracciamento, uno verrà caricato su eBay alla fine della giornata lavorativa
Domande: Siamo felici di fare del nostro meglio per rispondere a domande sensate e autentiche durante il nostro normale orario di ufficio (lun-ven 09:30-17:30), tuttavia tieni presente che non abbiamo una conoscenza intima di tutte le marche e modelli o abbiamo esperienza personale di montaggio/utilizzo di tutti i nostri prodotti. I prodotti si adattano solo ai modelli dichiarati (se i prodotti si adattano ad altri modelli è a nostro favore dirlo)! I prodotti elencati come montaggio universale non sono progettati per nessun modello. I modelli suggeriti sono appropriati per il prodotto elencato, ma si prega di controllare le specifiche/dimensioni dove indicato - si prega di avere una comprensione di ciò che si sta acquistando prima dell'acquisto. Si prega di consentire 24 ore per rispondere alla domanda, se sono trascorse più di 24 ore si prega di contattarci nuovamente
Feedback: Sii ragionevole: non ci piace dare o ricevere altro che feedback positivi. Se hai un problema con il tuo ordine, contattaci e dacci l'opportunità di correggere la situazione: gli errori accadono, non spesso ma accadono
Soprattutto vogliamo che tu abbia un'esperienza di acquisto positiva e acquisti di nuovo da noi
L'IMMAGINE MOSTRA LA LUNGHEZZA MASSIMA DEL ROTOLO - IL PREZZO SI INTENDE PER METRO
Performance Part | Yes |
Interchange Part Number | n/a |
Reference OE/OEM Number | n/a |
Country/Region of Manufacture | United Kingdom |
Temperature Rating | 50 °C |
Item Diameter (Exterior) | 13.5mm |
Type | Hose |
Universal Fitment | Yes |
Finish | Matte |
Placement on Vehicle | Engine Compartment |
Placement on Vehicle | Front |
Placement on Vehicle | Rear |
EAN | n/a |
Superseded Part Number | n/a |
Items Included | Hose |
Material | Rubber |
Material | Stainless Steel |
Manufacturer Part Number | LMA367 |
Item Length | 1m |
End Fitting Type | Male Barbed Hose Fitting |
Classic Part | No |
Fluid Type | Petroleum Based Liquid |
Manufacturer Warranty | 1 Year |
Pressure Rating | 30 bar |
Features | Petroleum Resistant |
Features | Protective Sleeve Attached |
Features | Reinforced |
Features | Rust-Resistant |
Grade | DIN 73379 |
Item Diameter (Interior) | 7.5mm |
Brand | LMA |
MLR HIGH PRESSURE STAINLESS STEEL BRAIDED FUEL INJECTION HOSE
8mm ID
SUITABLE FOR:
Fuel injection and carburettor systems
OTHER HOSE AND FITTINGS ALSO AVAILABLE - PLEASE SEE OUR SHOP ITEMS
PRICED PER METER (sold as one uncut length) 1 ITEM = 1 METER
HOSE SPEC:
Type: Stainless Steel overbraid
Inner: Fabric braid over black fuel resistant Rubber hose
Internal Diameter: 7.5mm
Outside Diameter: 13.5mm (Approx)
Temperature Range: -30°C to +50°C (Fuel)
Suitable For: Petrol / Oil / Water / Air
Working Pressure: 100psi (7bar)
Test Pressure: 290psi (20bar)
Burst Pressure: 435psi (30bar)
Standards: DIN 73379 (3/82)
Max Roll Length: 20m
To cut the hose: Wrap masking tape tightly round the hose, support in a vice and cut with a sharp fine tooth hacksaw
Designed for Motorsport Use. No instructions are included
Picture shows what you will receive if you purchase this item
IMPORTANT INFORMATION:
Postage: We will endeavour to despatch most items purchased before 3pm the same day (may not be possible on all items following bank holidays/busy periods etc). If any items cannot be despatched within the stated time frame we will contact you - despatch times are shown on each listing (we cannot be held responsible for delivery companies/couriers that do not deliver on time due to address queries/bad weather/locational errors etc). For shipping prices please click on the "Postage and Payments" tab (postage prices also include packaging/materials & other costs). Most of our listings have a number of postage options - please select the service you require BEFORE purchase. If you have selected a postage service with a tracking number, one will be uploaded to eBay at the end of the working day
Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated - please have an understanding of what you are buying before purchase. Please allow 24h for us to respond to your question, if more than 24 hours has elapsed please contact us again
Feedback: Please be reasonable - we do not like to give or receive anything but positive feedback. If you have a problem with your order please contact us and give us the opportunity to rectify the situation - mistakes do happen, not often but they do happen
Above all we want you to have a positive buying experience and purchase from us again
PICTURE SHOWS MAX ROLL LENGTH - PRICE IS PER METER