MLR MANGUERA DE INYECCIÓN DE COMBUSTIBLE TRENZADA DE ACERO INOXIDABLE DE ALTA PRESIÓN
identificación de 8 mm
ADECUADO PARA:
Sistemas de inyección de combustible y carburador
OTRAS MANGUERAS Y ACCESORIOS TAMBIÉN DISPONIBLES - VEA NUESTROS ARTÍCULOS DE LA TIENDA
PRECIO POR METRO (se vende como una longitud sin cortar) 1 ARTÍCULO = 1 METRO
ESPEC. MANGUERA:
Tipo: Sobretrenzado de acero inoxidable
Interior: trenza de tela sobre manguera de goma negra resistente al combustible
Diámetro interno: 7,5 mm
Diámetro exterior: 13,5 mm (aprox.)
Rango de temperatura: -30 °C a +50 °C (combustible)
Adecuado para: gasolina/aceite/agua/aire
Presión de trabajo: 100 psi (7 bar)
Presión de prueba: 290 psi (20 bar)
Presión de explosión: 435 psi (30 bar)
Normas: DIN 73379 (3/82)
Longitud máxima del rollo: 20 m
Para cortar la manguera: envuelva la manguera con cinta adhesiva, apóyela en un tornillo de banco y córtela con una sierra afilada de dientes finos.
Diseñado para uso en deportes de motor. No se incluyen instrucciones.
La imagen muestra lo que recibirá si compra este artículo
INFORMACIÓN IMPORTANTE:
La mayoría de nuestros listados tienen varias opciones de envío: seleccione el servicio que necesita ANTES de comprar. Si ha seleccionado un servicio postal con un número de seguimiento, se cargará uno en eBay al final de la jornada laboral.
Preguntas: Nos complace hacer todo lo posible para responder preguntas sensatas y genuinas durante nuestro horario normal de oficina (de lunes a viernes de 09:30 a 17:30), sin embargo, tenga en cuenta que no tenemos un conocimiento profundo de todas las marcas y modelos ni tenemos experiencia personal de instalación/uso de todos nuestros productos. ¡Los productos solo se ajustan a los modelos indicados (si los productos se ajustan a otros modelos, está a nuestro favor decirlo)! Los productos enumerados como accesorios universales no están diseñados para ningún modelo. Los modelos sugeridos son apropiados para el producto enumerado, pero verifique las especificaciones/tamaños donde se indica; comprenda lo que está comprando antes de comprar. Espere 24 horas para que respondamos a su pregunta, si han transcurrido más de 24 horas, contáctenos nuevamente
Retroalimentación: Sea razonable: no nos gusta dar ni recibir nada más que comentarios positivos. Si tiene un problema con su pedido, comuníquese con nosotros y dénos la oportunidad de corregir la situación. Los errores ocurren, no a menudo, pero ocurren.
Sobre todo, queremos que tenga una experiencia de compra positiva y que vuelva a comprarnos.
LA IMAGEN MUESTRA LA LONGITUD MÁXIMA DEL ROLLO - EL PRECIO ES POR METRO
Performance Part | Yes |
Interchange Part Number | n/a |
Reference OE/OEM Number | n/a |
Country/Region of Manufacture | United Kingdom |
Temperature Rating | 50 °C |
Item Diameter (Exterior) | 13.5mm |
Type | Hose |
Universal Fitment | Yes |
Finish | Metallic |
Placement on Vehicle | Front |
Placement on Vehicle | Rear |
EAN | n/a |
Superseded Part Number | n/a |
Items Included | Hose |
Material | Rubber |
Material | Stainless Steel |
Manufacturer Part Number | LMA367 |
Item Length | 1m |
End Fitting Type | Male Barbed Hose Fitting |
Classic Part | No |
Fluid Type | Petroleum Based Liquid |
Manufacturer Warranty | 1 Year |
Pressure Rating | 30 bar |
Features | Petroleum Resistant |
Features | Protective Sleeve Attached |
Features | Reinforced |
Features | Rust-Resistant |
Grade | DIN 73379 |
Item Diameter (Interior) | 7.5mm |
Brand | LMA |
MLR HIGH PRESSURE STAINLESS STEEL BRAIDED FUEL INJECTION HOSE
8mm ID
SUITABLE FOR:
Fuel injection and carburettor systems
OTHER HOSE AND FITTINGS ALSO AVAILABLE - PLEASE SEE OUR SHOP ITEMS
PRICED PER METER (sold as one uncut length) 1 ITEM = 1 METER
HOSE SPEC:
Type: Stainless Steel overbraid
Inner: Fabric Braid Over Black fuel resistant Rubber hose
Internal Diameter: 7.5mm
Outside Diameter: 13.5mm (Approx)
Temperature Range: -30°C to +50°C (Fuel)
Suitable For: Petrol / Oil / Water / Air
Working Pressure: 100psi (7bar)
Test Pressure: 290psi (20bar)
Burst Pressure: 435psi (30bar)
Standards: DIN 73379 (3/82)
Max Roll Length: 20m
To cut the hose: Wrap masking tape tightly round the hose, support in a vice and cut with a sharp fine tooth hacksaw
Designed for Motorsport Use. No instructions are included
Picture shows what you will receive if you purchase this item
IMPORTANT INFORMATION:
Postage: We will endeavour to despatch most items purchased before 3pm the same day (may not be possible on all items following bank holidays/busy periods etc). If any items cannot be despatched within the stated time frame we will contact you - despatch times are shown on each listing (we cannot be held responsible for delivery companies/couriers that do not deliver on time due to address queries/bad weather/locational errors etc). For shipping prices please click on the "Postage and Payments" tab (postage prices also include packaging/materials & other costs). Most of our listings have a number of postage options - please select the service you require BEFORE purchase. If you have selected a postage service with a tracking number, one will be uploaded to eBay at the end of the working day
Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated - please have an understanding of what you are buying before purchase. Please allow 24h for us to respond to your question, if more than 24 hours has elapsed please contact us again
Feedback: Please be reasonable - we do not like to give or receive anything but positive feedback. If you have a problem with your order please contact us and give us the opportunity to rectify the situation - mistakes do happen, not often but they do happen
Above all we want you to have a positive buying experience and purchase from us again
PICTURE SHOWS MAX ROLL LENGTH - PRICE IS PER METER