This Product Is Widely Used in Garden Irrigation, Farmland Irrigation,Used in Sanitary Fittings and Other Places.

The Product Is Made of New High-quality Plastic, with Stable Quality and Long Service Life.

Widely Accepted by Users.

---

Product Information

⇒Product Name: External Thread Pvc Water Pipe Joint

⇒ Material: PVC

⇒ Product Color: White

⇒  Connection Method:

The Socket End Is Connected with the Pipe Glue,

The Threaded End Is Connected to the Threaded Ring of the Pipe

⇒ Application: Garden Irrigation✔️aquarium Requirements✔️pipe Connection ✔️home Textiles✔️

⇒ Packing Quantity: 1/2/3/4/5/8/10/15/20/25/30

---

⇒ Features

● 1. Using High-quality Pvc Raw Materials, Green and Environmental Protection, Production

They Strictly Abide by the Standards and Use Environmentally Friendly Materials

● 2. Thickening Treatment, As Long As New, Unbreakable and Compressible, Light Weight,

High Quality, Longer Life

● 3. Give You the Peace of Mind, Transparency, Non-scaling, Tightness, and No Leakage

● 4. Convenient Construction, Professional Design of Glue + Line, Compact Structure

---

⇒  Connection Method: Gluing (Gluing on the Inside of the Pvc Pipe Fittings and the Outside of the Pipe Fittings,

Insert Within 1 Minute. 15 Minutes to Install and Fix, some Will Be Needed After 2 Hours

Reach Strength and Release Water After 24 Hours. This Is the Best Effect. )

---

⇒Specifications:

👉External Tooth Diameter: 20.2mm (1/2")

External Tooth Length: 14.6mm

Total Height: 37.9mm

Socket Inner Diameter: 20mm

Base Thickness 2.5mm

 

👉External Tooth Diameter: 26mm (3/4")

External Tooth Length: 17mm

Total Height: 42mm

Bushing Inner Diameter: 25mm

Base Thickness 2.8 Mm

 

👉External Tooth Diameter: 32mm (1")

External Tooth Length: 19.7mm

Total Height: 47.2mm

Socket Inner Diameter: 32mm

Base Thickness 3.0mm

 

👉External Tooth Diameter: 40mm (1.2")

External Tooth Length: 22.7mm

Total Height: 52.8mm

Bushing Inner Diameter: 40mm

Base Thickness 3.2 Mm

 

👉External Tooth Diameter: 47.2mm (1.5")

External Tooth Length: 25.8mm

Total Height: 60.7mm

Bushing Inner Diameter: 50mm

Base Thickness 3.6mm

 

👉External Tooth Diameter: 58.6mm (2")

External Tooth Length: 27.5mm

Total Height: 70.5mm

Socket Inner Diameter: 63mm

Base Thickness 3.8mm

 

👉External Tooth Diameter: 74.8mm (2.5")

External Tooth Length: 29.8mm

Total Height: 77mm

Bushing Inner Diameter: 75mm

Base Thickness 4.0mm

 

👉External Tooth Diameter: 87.7mm (3")

External Tooth Length: 30mm

Total Height: 86.2mm

Bushing Inner Diameter: 90mm

Base Thickness 5.0mm

 

👉External Tooth Diameter: 112.7mm (4")

External Tooth Length: 39.2mm

Total Height: 111mm

Socket Inner Diameter: 110mm

Base Thickness 5.5mm

---

⇒ Dear Customer:

1. If You Need a Large Amount or Other Quantity, We Can Deliver the Goods According to Your Requirements.

Please Contact Us. Thank You.

2. If You Need Other Sizes, We Can Adjust Them,For Details, Please Contact Our Customer Service.

---

⇒  The Package Includes:

According to Your Choice.

Other Accessories Are Not Included in the Scope of Supply.

---

⇒  Feedback:

Feedback Is Very Important to Us.

If You Are Satisfied with the Product, I Hope You Can Give Us a Positive Feedback.

We Request That You Contact Us Immediately Before Providing Us with Neutral or Negative Feedback

so That We Can Satisfactorily Resolve Your Concerns.

---

⇒  Guarantee:

Not Bad, Good Quality. Buy with Confidence!

We Uphold High Standards and Pursue Excellence, and Strive for 100% Customer Satisfaction!

---

⇒  Note:

Please allow small errors caused by manual measurement. Thank you for your understanding.

The monitor is not calibrated and is the same color as the product shown in the photo

It may be slightly different from the actual product. Please refer to the actual product.

PVC Water Supply Pipe Size Description （Inch, Dn, Metric Comparison Table) Unit (mm)
Imperial	DN	Metric
1/8"	DN4	φ9.5
1/4"	DN6	φ13.5
3/8"	DN10	φ16.5
1/2"	DN15	φ20
3/4"	DN20	φ25
1"	DN25	φ32
1,2"	DN32	φ40
1,5"	DN40	φ50
2"	DN50	φ63
2,5"	DN65	φ75
3"	DN80	φ90
4"	DN100	φ110
For example (3/4”=DN20=φ25)