eBay

These are quality ASH intercooler kits using the best quality silicone and aluminum elbows. Some of the inferior kits use very low quality silicone and aluminum which is very thin

57mm or 2 1/4" Universal Aluminum Pipe Kit (Red Silicone)

Kit Includes:

2 x 90 Degree Mandrel Bend 300mm long
2 x 45 Degree Mandrel Bend 300mm long
2 x 180 Degree U-Bent Mandrel Pipe 300mm long
2 x Straight Pipe 300mm long
8 x Straight Couplers Polyester Reinforced High Temperature Silicone Hose
16 x T-Bolt Clamps

Aluminium elbows are ideal for use when plumbing in an intercooler. The pipes are highly polished for a professional looking finish with a rolled bead at each end to provide a secure location for the hose clip.

They can be easily joined together through the use of a silicone coupling hoses to create custom pipework. The aluminium elbows are made from 6063 aluminium which are easy to weld should modifications be needed.

T6 grade aluminium hose joiner elbows. Feature a bead at either end with leg lengths of approximately 150mm. Highly polished finish.


SELECT LENGTH	300mm
LEG LENGTH	150mm Per Each Leg (300mm Total)
WALL THICKNESS	1.6mm
TEMPERATURE RATING	-40°C to +220°C
APPLICATION	Radiators, Air Induction, Superchargers, Intercooler Systems
SAFETY FACTOR	3:1
HOSE GRADE	T6063 Polished Aluminium
HOSE CONSTRUCTION	Mandrel Bent
SELECT MATERIAL	Aluminium
MANUFACTURER	Auto Silicone Hoses

Silicone hoses are designed to connect metal pipe work and components in systems using water and ethylene glycol based coolants. Our 60 degree elbows are perfect if you need slight angle changes in runs of pipe work.

Silicone hose is a extremely flexible compared to rubber, with the ability to maintain this flexibility over the lifespan of its use. Under some conditions rubber hoses are at risk of splitting, hardening, or dry rot, which is why silicone hoses are the choice for many trucks, buses, performance cars, and many other vehicle and industrial applications.

We increase the number of plys and wall thickness of our 60 degree hoses as the diameter increases, this is because we want all our range capable of carrying fluid and air at very high pressures. So if you’re building a racing vehicle, adding turbochargers or superchargers, our silicone hose is the way to go.


SELECT ANGLE	90 Degree Elbow
SELECT LENGTH	300mm
LEG LENGTH	150mm Per Each Leg (300mm Total)
WALL THICKNESS	4.5mm / 5.5mm
TEMPERATURE RATING	-60°C to +180°C
APPLICATION	Engine Coolant Systems, Radiator Hose
SAFETY FACTOR	3:1
HOSE GRADE	SAE J20 R1/A
HOSE CONSTRUCTION	Polyester Reinforcement / VMQ Silicone Rubber
SELECT MATERIAL	Silicone Polyester Reinforced
MANUFACTURER	Auto Silicone Hoses