Main functions:

AutoRange/Analog Bar Display/True RMS/NCV/Data hold/Back light/LED lamp/Diode test/Triode test/Continuity/Over load protection/Low Battery Indication/Auto Power Off/Short-circuit protection.

NCV:

Place the multimeter close to the AC voltage source (no wire is required) and the multimeter will display the voltage and give a corresponding prompt.

HTN full-viewing angle screen, 180 degree viewing angle. Has two LED backlights, Display is brighter than other sellers'. When the measured voltage exceeds 80V or current exceeds 1A, the white backlight will turn orange as a danger warning.

Wide range of applications: car repair, industrial circuit inspection, home circuit check.

Specification:

Package Content:

1 x HT118A Multimeter

1 x Test Leads

2 x AA Battery

1 x User Manual

1x Thermocouple


Multi-Function

Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.

Z/F Button Measurement

Press the "Z/F" button to switch the respective secondary function between the different measurements, such as between AC and DC.

If current> 3A, the orange display lights up.

The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).

In the real scene 

To measure the current, you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from the two wires canceling each other; therefore, the meter reads 0 A.

Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp; otherwise additional errors will occur.

NCV Detection Function  

Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.

Automatic Shutdown

If there is no operation in 15 minutes, the meter will beep 3 times, indicating for Auto Power Off; with, with no further operation in 30 seconds, the meter beeps again and automatically shuts down.

Temperature Measurement

Range: -4°F~1832°F

The K-type thermocouple included

What Do You Get?

1 x Kaiweets Digital Clamp Meter 1 x Test Leads (Pair), 1 x Thermocouples(Pair), 2 x AAA batteries, 1 x User Manual, 1 x Carrying Bag

  • SPECIFICATION
  • Item Weight
  • 0.22 KG
  • Product Dimensions
  • 7.5 x 2.8 x 1.3 inches
  • Batteries
  • 2 AAA batteries required
  • Material
  • ABS
  • Voltage
  • 600.00 volts
  • Upgraded Specification
  • ● DC Voltage: 600mV/6V/60V/600V
    ● AC Voltage: 6V/60V/600V
    ● DC Current: 60A/600A
    ● AC Current: 60A/600A
    ● Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
    ● Capacitance: 10nF/100nF/1mF/10mF/100mF/1mF/ 10mF/100mF