eBay

ANYCUBIC Wash & Cure 3.0

Larger Size for Upgraded Capacity

Compared to Anycubic Wash & Cure 2.0, the Anycubic Wash & Cure 3 has an impressive 100% increase in cleaning basket capacity, now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters.

This makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less.The curing size has increased by 15%, up to 160*180 millimeters, to accommodate larger and more models for single

post-processing session.

Localized Strengthening, Uniform Curing

The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models

and the hem of garments.

By adopting a brand new arrangement of light beads and lens light source, Anycubic Wash & Cure 3's curing uniformity has been enhanced by 20% compared to its predecessor 2.0. This results in a more thorough and

comprehensive curing of the entire model.

Anycubic Wash & Cure 3 - Localized Strengthening

Dual-layer Design, IPA Saving

Anycubic Wash & Cure 3 machine features an elegant pearl white body complemented by a sleek gray-toned cover, exuding a fresh and minimalist aesthetic. The convenient all-in-one flip cover design allows for

easy opening and closing. The user-friendly control panel interface ensures a smooth and seamless operation experience.

Simple Operation, Quiet and Efficient

Cleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Infinite rotary knob control, adjustable from 1 to 30 minutes at will.

Through a more sealed structural design and software optimization, the noise interference generated during cleaning and curing is reduced^[1], creating a quieter and more comfortable working environment.

Anycubic Wash & Cure 3 - Simple Operation

Anycubic Wash & Cure 3 - Quiet and Efficient

[1] Measured by Anycubic Laboratory the maximum sound < 65dB in the operating state of the machine.

Models Display

Tech Specs

About this item

【Larger Size for Upgraded Capacity】Anycubic Wash & Cure 3’s maximum cleaning volume is up to 165*100*180mm³(3L), 42% larger than Wash & Cure 2.0. The total volume of the cleaning bucket has been expanded to 4L. The curing size has increased by 42%, up to 160*180 mm, to accommodate larger and more models for single post-processing session.
【Localized Strengthening, Uniform Curing】The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the local curing effect. By adopting a brand new arrangement of light beads and Lens light source, wash and cure 3’s curing uniformity has been enhanced by 20%, bringing in a more thorough and comprehensive curing of the entire model.
【Dual-layer Design, IPA Saving】Anycubic wash and cure 3 machine adopts the double-layer PP material cleaning basket designed with two heights at 100mm and 165mm, to flexibly accommodate print platforms from 5.9" to 7.3". This design maximizes the efficiency of IPA usage.
【Simple Operation, Quiet and Efficient】One click to select cleaning and curing dual mode & switch the Gooseneck light curing mode. Infinite rotary knob control, adjustable from 1 to 30 minutes at will. Besides, a more sealed structural design and software optimization help to reduce the noise interference generated during cleaning & curing, creating a quieter and more comfortable working environment.
【Wide Compatibility】Enlarged size enables ANYCUBIC Wash & Cure 3 Station to be compatible with anycubic photon mono 2, mars 3 series, mars 4, mars 4 ultra and other consumer-grade resin 3D printers measuring 7.3'' and below available on the market.

In The Box