Directional Characteristics: | Cardioid |
Principle of Operation: | Pressure gradient |
Cartridge Type: | Pre-polarized condenser |
Frequency Range: | 20 Hz - 20 kHz |
Frequency range, ± 2 dB, Near field 2-3 cm (0.8-1.2 in): | 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz |
Sensitivity, nominal, ± 3 dB at 1 kHz: | 6 mV/Pa; -44 dB re. 1 V/Pa |
Equivalent noise level, A-weighted: | Typ. 28 dB(A) re. 20 µPa (max. 30 dB(A)) |
Equivalent noise level, ITU-R BS.468-4: | Typ. 40 dB (max. 42 dB) |
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): | Typ. 66 dB(A) |
Total Harmonic Distortion (THD): | -1 % up to 123 dB SPL peak; -1 % up to 120 dB SPL RMS sine |
Dynamic Range: | Typ. 95 dB |
Max. SPL, Peak Before Clipping: | 144 dB |
Output Impedance: | From MicroDot: 30 - 40 ohm. From DAD6001-BC: 100 ohm |
Cable Drive Capability: | Up to 300 m (984 ft) with DAD6001-BC XLR adapter |
Output Balance Principle: | Signal balanced with DAD6001-BC XLR adapter |
Common Mode Rejection Ratio (CMRR): | +60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter |
Power Supply (For Full Performance): | Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power +/- 4 |
V with DAD6001-BC XLR Adapter | |
Current Consumption: | Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter. |
Connector: | MicroDot |
Weight | |
Microphone Boom: | 0.8 g (0.03 oz) |
Earhook: | 1.1 g (0.04 oz) |
Cable: | 6.6 g (0.23 oz) |
Total: | 8.5 g (0.30 oz). |
Microphone Head Size (h x w x d): | 9.5 x 5.3 x 2.9 mm (0.37 x 0.21 x 0.11 in) |
Capsule Diameter: | 5.4 mm (0.2 in) |
Mic Boom Length: | 120 mm (4.7 in) |
Cable Length: | 1.3 m (4.3 ft) |
Cable Color: | beige |
Cable Diameter: | 1.6 mm (0.06 in) |
Polarity: | +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter) |
Electro Magnetic Compatibility (EMC): | Fully compatible |
Temperature Range: | -40 °C to 45 °C (-40 °F to 113 °F) |
Relative Humidity (RH): | Up to 90% |