Our ideal goal is to satisfy every customer. If you have any dissatisfaction with the product, please feel free to contact us. We will give you a satisfactory solution.
2. 10A Solar controller
3. 1000w pure sine inverter
Max continuous power:600w
Peak Load Power Rate:1000w
NO load current draw: <0.6A,<0.4A
Input DC Voltage Range: DC9.7V-15.5V,20V-30V
Output Voltage Range:AC220/110+/-5%
Output Frequency Range:50+/-3HZ
Max working Temperature:<65℃
Max Power efficiency:>90%
High voltage cutoff level:15V+/-0.5V,30V+/-0.5V
Low voltage Cutoff level:10V+/-0.3V,20V+/-0.3V
Low voltage Alarm Level:11V+/-0.5V,21V+/-0.5V
Overload and Short Circuit Protection: YES
Input Voltage: DC12V,DC24V
Output Waveform:Modified sine wave
Cooling fan:Cooling fan Product size:166.7*95*55mm
Notes for use
a. This product must not come into contact with highly corrosive substances.
b. It is strictly forbidden to modify, disassemble, drop, and hit the junction box and products by yourself, avoid stepping on the surface and scratching the surface with hard objects during use.
c. A large number of scratches or dirt on the surface of the solar panel may cause the solar cell module to be inefficient, and in severe cases may cause burnout.
d. The suitable ambient temperature range of this product: -20 ° C-80 ° C, please do not exceed this range.
e. The solar panel must be installed in an area with good sunlight and no shadow. The long-term work of the solar cell module in the sun with shadow may have the risk of burning.
f. It is forbidden to connect the positive and negative poles of the product together, and it is forbidden to put the product into water or fire, otherwise it will damage the product.
g. The overall power of the photovoltaic module must be less than the rated power of the controller (rated voltage × rated current). It is strictly prohibited to overload the controller.
h. The total voltage of the photovoltaic module connected to the controller must be within the photovoltaic input voltage range of the controller.
i. The inverter can only be connected to the battery, not directly to the controller.