Product Name: Tire Pressure Sensor TPMS

Fitment Type: Direct Replacement

Model: For Honda

Quantity: 4PCS

 

06421-S3V-A03, 06421-S3V-A02, 06421-S3V-A01, 06421-S3V-A04

 

Please make sure the interchange part number matches the part you are replacing.

Please check our photos and make sure the part shown looks identical to your stock one.

2006-2008 Acura TL

2005-2006 Acura MDX

2005-2008 Acura RL

2006-2014 Honda Ridgeline

2005-2007 Honda Odyssey

2005-2008 Honda Pilot

2007 Honda ODYSSEY 5-DOOR EXL-T, EXL-T (RES NAV) 5 Speed Automatic

2006 Honda ODYSSEY 5-DOOR EXL-T, EXL-T (NAV) 5 Speed Automatic

2005 Honda ODYSSEY 5-DOOR EXL-T, EXL-T (RES NAV) 5 Speed Automatic

2008 Honda PILOT 5-DOOR EX (2WD), EX (4WD), EX-SE (2WD), EX-SE (4WD), EXL (2WD NAVI), EXL (2WD RES), EXL (2WD), EXL (4WD NAVI), EXL (4WD RES), EXL (4WD), LX-VP (2WD), LX-VP (4WD) 5 Speed Automatic

2007 Honda PILOT 5-DOOR EX (2WD), EX (4WD), EXL (2WD NAVI), EXL (2WD RES), EXL (2WD), EXL (4WD NAVI), EXL (4WD RES), EXL (4WD), LX (2WD), LX (4WD) 5 Speed Automatic

2006 Honda PILOT 5-DOOR EX (2WD), EX (4WD), EXL (2WD NAVI), EXL (2WD RES), EXL (2WD), EXL (4WD NAVI), EXL (4WD RES), EXL (4WD), LX (2WD), LX (4WD) 5 Speed Automatic

2005 Honda PILOT 5-DOOR EX, EXL, EXL (NAVI), EXL (RES) 5 Speed Automatic

2014 Honda RIDGELINE SEDAN RT 5 Speed Automatic

2013 Honda RIDGELINE SEDAN RT 5 Speed Automatic

2012 Honda RIDGELINE SEDAN RT (MFG US1), RT (MFG US2) 5 Speed Automatic

2011 Honda RIDGELINE SEDAN RT 5 Speed Automatic

2010 Honda RIDGELINE SEDAN RT 5 Speed Automatic

2009 Honda RIDGELINE SEDAN RT 5 Speed Automatic

2008 Honda RIDGELINE SEDAN RTL (SUNROOF), RTL (SUNROOF/NAVI), RTS, RTX 5 Speed Automatic

2007 Honda RIDGELINE SEDAN RTL (SUNROOF), RTL (SUNROOF/NAVI), RTS, RTX 5 Speed Automatic

2006 Honda RIDGELINE SEDAN RTL, RTL (SUNROOF), RTL (SUNROOF/NAVI), RTS 5 Speed Automatic

 

 

4pcs sensors

You will receive exactly what you see on the picture.

 

 

Installation Process

1. Loosen the tire: Remove the valve cap and core and deflate the tire.

2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.

3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.

4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.

5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.