1. Wire connector, open the glue
2 Apply glue
3. Leave it for ten minutes after application
4. Finished in ten minutes

1. In order to achieve the best results, please avoid direct sunlight, high humidity or windy environments.
2 When performing electrical maintenance, please comply with local electrical regulations.
3Always disconnect the power before application
4 Please stir well before use
5. Make sure the surface is clean and dry.
6 Wrap liquid tape on the connection or repair area to completely cover the repair area to achieve air tightness and water tightness.

7 At least 10 minutes between two coverages, at least 2 layers are recommended

8. Please wait at least four hours for the drying period before use. Before waiting for the power supply, please let the liquid electrical tape dry completely