A Set of 20 Good Quality Closed End Replacement Wheel Nuts
Fit All the following Landrover Models (With Factory Fitted Alloy Wheels Only)
Landrover Freelander Gen 2 from 2006 to 2014
Range Rover Evoque from 2011 onwards
Range Rover Velar from 2018 onwards
This Ad is for a set of 20 nuts
Technical Specification
A Solid Nut, Chrome Plated M14x1.5mm Thread, 32mm Deep with closed end and a 60 degree Tapered Seat. Uses a 21mm Socket/Wrench as OE Spec
Important Information
Always compare the seating and thread with the original equipment fitted, The Manufacturer Strongly recommends that each installation should be inspected during fitment and thoroughly checked after fitment (by spinning the wheel if necessary) after 200 miles or 300km use. Torque settings should be in accordance with vehicle manufacturers recommendations. If you are unsure about any aspect of fitting do not attempt to fit but contact your local dealer. Your wheel hubs or brakes may be adversely affected by wrongly fitted wheel nuts. Do not use air guns to fit.
These nuts are specified to fit the vehicle shown in the compatibility table, please note they are specified for OE (original equipment) not aftermarket wheels. If your vehicle has aftermarket wheels fitted you should seek advice from the wheel manufacturer to ensure you have the correct seating.
Fitment: If no choices are shown in the compatibility "Notes" field then this product should be correct for the vehicle you have selected. If you need any help please contact us through the "contact seller" tab, please include your vehicle registration number and the parts you require, we can then send you links to the correct items for your vehicle.