A Set of 24 Good Quality Replacement Wheel Bolts

Fit All the following Mercedes Benz Models with Factory Fitted Alloy & Steel Wheels

Mercedes Sprinter Van (Gen 2) models from 2006 to 2016

This Ad is for a Set of 24 Bolts

Technical Specification

Dacromet Plated Finish, M14x1.5mm Thread With R14 Radius Seat, Overall bolt length 55mm, length of bolt to Radius Shoulder 34mm & Uses a 19mm Socket/Wrench

Important Information

Always compare the seating and thread with the original equipment fitted, The Manufacturer Strongly recommends that each installation should be inspected during fitment and thoroughly checked after fitment (by spinning the wheel if necessary) after 200 miles or 300km use. Torque settings should be in accordance with vehicle manufacturers recommendations. If you are unsure about any aspect of fitting do not attempt to fit but contact your local dealer. Your wheel hubs or brakes may be adversely affected by wrongly fitted wheel nuts. Do not use air guns to fit.

These nuts are specified to fit the vehicle shown in the compatibility table, please note they are specified for OE (original equipment) not aftermarket wheels. If your vehicle has aftermarket wheels fitted you should seek advice from the wheel manufacturer to ensure you have the correct seating. 

Fitment: If no choices are shown in the compatibility "Notes" field then this product should be correct for the vehicle you have selected. If you need any help please contact us through the "contact seller" tab, please include your vehicle registration number and the parts you require, we can then send you links to the correct items for your vehicle.

 Legal Information & Product Fitment – All data in this ad is taken via third party databases, the company makes every effort to ensure the listings are accurate but responsibility will not be accepted for errors or omissions with-in the listings. You should always check the product being fitted against the part being removed and check that they are of the same specification, if you are unsure you should consult your vehicle dealership for advice. “The Company” cannot be held responsible for any consequential loss or damage caused by the incorrect fitting of a part or fitting a part that is not suitable for the vehicle application – If you are unsure you should always seek the advice and opinion of a qualified vehicle mechanic.  Any purchase made through this ad constitutes the acceptance of these terms and conditions.