|
6" x 1" Conversion Polishing Mop Kit For 1/2 HP Grinders 3 Mop Compounds Spindle
Description
COARSE / SISAL MOP
-Suitable for removing scratches and bad staining as well as paint and rust.
-Fast cutting first stage polishing mop.
-Coarse buffing wheel used for the 1st stage of metal polishing
-Removes light marks left from preparation and are usually suitable for use with a grey compound
-Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and non-ferrous materials
-Fastened together with leather washers for maximum support when using the mop
-British Manufactured mops
-Suitable for use with a bench grinder / polishing machine
-Used on a taper spindle
SPECIFIC SPECIFICATIONS
-DIAMETER OF THE MOP - 6" (150mm)
-WIDTH OF THE MOP 1" (2 ROW) (25mm)
-MAXIMUM SPEED 3000RPM
WHITE CLOSE STITCHED MOP
-Multi layered and tight stitched polishing mop to provide a top quality durable mop
-Manufactured from 100% white cotton
-Very versatile polishing and buffing wheel used for the first cut, general polishing or finishing.
-Suitable for a number of materials including aluminium, alloys, brass, copper, steel and stainless steel
-Normally used in the middle stage of the polishing process and are usually used with green compound
-Good for a one shot polishing operation where you need the brightness back and the condition of the metal is not marked / scratched or badly pitted
-Fastened together with leather washers for maximum support when using the mop
-Suitable for use straight away
-British Manufactured mops
-Suitable for use with a bench grinder / polishing machine
-Used on a taper spindle
SPECIFIC SPECIFICATIONS
-DIAMETER OF THE MOP - 6" (150mm)
-WIDTH OF THE MOP 1" (2 ROW) (25mm)
-MAXIMUM SPEED 3000RPM
G LOOSE UNSTITCHED FLOPPY MOP
-Suitable for the final stage polishing and finishing on non-ferrous and ferrous surfaces
-Most popular grade of finishing mop
-100% cotton discs
-Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and non-ferrous materials such as plastics
-Also suitable for use on woods and resins
-Fastened together with leather washers for maximum support when using the mop
-Does not fray or leave as much dust as other finishing mops
-British Manufactured mops
-Suitable for use with a bench grinder / polishing machine
-Used on a taper spindle
-Suitable for use straight away
-Normally used in the final stage of the polishing process and are usually used with blue compound
SPECIFIC SPECIFICATIONS
-DIAMETER OF THE MOP - 6" (150mm)
-WIDTH OF THE MOP 1" (2 ROW) (25mm)
-MAXIMUM SPEED 3000RPM
MENZEMA GREY COARSE COMPOUND
-Heavy duty compound for hard materials
-Suitable for use with a number of materials including steel, stainless steel, iron and titanium
-The polishing compound is use by polishers on metals to cut and bring out the colour of the material.
-Commonly used with a sisal mop
-Long lasting composition with minimum usage
-Water soluble
-Will not cause any discoloration
-Will remove 240 - 320 grit marks
-Total weight of the bar 250 grams
MENZEMA GREEN PRE POLISHING BUFFING COMPOUND
Pre polishing compound that is suitable for all metals.
-Dual Purpose medium abrasive compound for first stage polishing of soft materials and final buffing of harder materials.
-Commonly used with a sisal stitched mop.
-Long Lasting composition with minimum usage.
-Suitable for use with a number of materials including steel, stainless steel, iron and titanium
-Will not cause any discoloration.
-Water Soluble.
-Total weight of the bar 250 grams.
MENZEMA BLUE FINAL FINISHING COMPOUND
-Suitable for the final stage of polishing
-Suitable for use with a number of materials including steel, stainless steel, iron and titanium
-Recommended for use with final finishing floppy buffing wheels
-Long Lasting composition with minimum usage.
-Will not cause any discoloration.
-Water Soluble.
-Total weight of the bar 250 grams.
POLISHING SPINDLE
-This spindle allows you to convert your bench grinder into a polishing machine
-Brings the mop out away from the machine and providing a taper thread for you to attach a mop
-Fits virtually all 6" bench grinders (with a 1/2" shaft)
-Suitable for a right hand side of your grinder as you look at the front
-Fixes via a grub screw (we do not use threaded spindles because you rely on the accuracy of the thread on the grinder which often leads to a wobbly non centres shaft).
-Total length of the spindle 4-3/4" / 120mm
We have other Polishing Kits available in our shop.
|