Features:
1. Beautifully designed alloy shell body, easy to take pictures and take pictures at the same time, 2. High sensitivity motion detection function.
3. The 4.0-inch high-resolution IPS display screen can immediately see the pictures taken at the scene, and can be played immediately at the scene of an accident, clarifying the responsibility of the accident and reducing the occurrence of disputes.
4. Satisfy a variety of players to play directly, easily upload video sites
5. 100w pixel ultra-wide-angle high-definition 4-glass lens, the viewing angle can reach 170°, the line of sight can reach both sides of the front end of the car, and there is no dead angle for complete recording
6. TF card using CLAS5-10 or above storage device, maximum support 32GB
7. Easy to install, keep the original appearance of the original car
8. Gravity induction, which can clearly grasp the impact force of the vehicle. When the impact is sensed, the gravity induction starts to automatically save this important video. (The video saved in this section will not be overwritten by the loop)
1. Beautifully designed alloy shell body, easy to take pictures and take pictures at the same time, 2. High sensitivity motion detection function.
3. The 4.0-inch high-resolution IPS display screen can immediately see the pictures taken at the scene, and can be played immediately at the scene of an accident, clarifying the responsibility of the accident and reducing the occurrence of disputes.
4. Satisfy a variety of players to play directly, easily upload video sites
5. 100w pixel ultra-wide-angle high-definition 4-glass lens, the viewing angle can reach 170°, the line of sight can reach both sides of the front end of the car, and there is no dead angle for complete recording
6. TF card using CLAS5-10 or above storage device, maximum support 32GB
7. Easy to install, keep the original appearance of the original car
8. Gravity induction, which can clearly grasp the impact force of the vehicle. When the impact is sensed, the gravity induction starts to automatically save this important video. (The video saved in this section will not be overwritten by the loop)
Specification:
Material: aluminum alloy + electronic components
Color: Iron Grey
LCD screen size: 4 inches
Camera: 2 million pixels
Video format: MOV
Video resolution: 1080P/720P/VGA 30FPS
Photo resolution: L3M, 2M, 3M, 5M, 8M, 10M, 12M
Photo format: JPG
Memory card type: TF card, maximum support 32GB
Pull back camera: support
Language settings: Simplified Chinese, Traditional Chinese, English, French, Spanish, Portuguese, German, Russian, Japanese, etc.
Microphone/Speaker: Support
USB interface: USB 2.0 5pin
Power interface: USB 2.0 DC5V 1.5A
Frequency: 50Hz/60Hz
Battery: 300mAh3,7 polymer lithium battery
Working current: 590mA
Storage temperature: -30-70℃
Operating temperature: 0-50℃
Size: 110*66*35mm
Material: aluminum alloy + electronic components
Color: Iron Grey
LCD screen size: 4 inches
Camera: 2 million pixels
Video format: MOV
Video resolution: 1080P/720P/VGA 30FPS
Photo resolution: L3M, 2M, 3M, 5M, 8M, 10M, 12M
Photo format: JPG
Memory card type: TF card, maximum support 32GB
Pull back camera: support
Language settings: Simplified Chinese, Traditional Chinese, English, French, Spanish, Portuguese, German, Russian, Japanese, etc.
Microphone/Speaker: Support
USB interface: USB 2.0 5pin
Power interface: USB 2.0 DC5V 1.5A
Frequency: 50Hz/60Hz
Battery: 300mAh3,7 polymer lithium battery
Working current: 590mA
Storage temperature: -30-70℃
Operating temperature: 0-50℃
Size: 110*66*35mm
Packing list:
1* Driving recorder
1* Rear camera cable set
1* Car Charger
1* suction cup
1* User Manual
1* data cable
1* Driving recorder
1* Rear camera cable set
1* Car Charger
1* suction cup
1* User Manual
1* data cable
Installation Guide :
1. Turn off the car engine and turn off the recorder.
2. Insert the TF card (Class 6 and above) into the card slot of the recorder [Note] For the first use, the TF card needs to be formatted in the recorder
3. Fix the recorder on the original rearview mirror of the car
4. Insert the car charger into the car cigarette lighter, and insert the other end into the USB interface of the recorder. [Note] When wiring, the charging extension cable can be laid along the edge of the windshield of the car
5. When installing the rear camera, first connect the plug to the recorder interface, and then route the wire from front to back along the vehicle shed. Install the rear camera at the rear of the vehicle. The red wire is connected to the positive pole of the reversing light, and the black wire is not connected. Ground wire, pay attention to the direction when installing.
6. Adjust the lens position to ensure that the lens is level with the ground.
7. Start the engine and check if the machine is installed correctly
1. Turn off the car engine and turn off the recorder.
2. Insert the TF card (Class 6 and above) into the card slot of the recorder [Note] For the first use, the TF card needs to be formatted in the recorder
3. Fix the recorder on the original rearview mirror of the car
4. Insert the car charger into the car cigarette lighter, and insert the other end into the USB interface of the recorder. [Note] When wiring, the charging extension cable can be laid along the edge of the windshield of the car
5. When installing the rear camera, first connect the plug to the recorder interface, and then route the wire from front to back along the vehicle shed. Install the rear camera at the rear of the vehicle. The red wire is connected to the positive pole of the reversing light, and the black wire is not connected. Ground wire, pay attention to the direction when installing.
6. Adjust the lens position to ensure that the lens is level with the ground.
7. Start the engine and check if the machine is installed correctly
Notice:
1. Please use the special adapter provided by our company. Using unqualified adapters will cause harm to the product, or even burn out the product.
2. Please do not use this product in a humid or high temperature environment
3 Please keep the lens clean, so as not to affect the camera effect
4. In order to protect your legitimate rights and interests, please do not disassemble this product without authorization
5. Please strictly abide by the relevant laws of the state, and do not use this product for illegal purposes, otherwise you will be responsible for the consequences
1. Please use the special adapter provided by our company. Using unqualified adapters will cause harm to the product, or even burn out the product.
2. Please do not use this product in a humid or high temperature environment
3 Please keep the lens clean, so as not to affect the camera effect
4. In order to protect your legitimate rights and interests, please do not disassemble this product without authorization
5. Please strictly abide by the relevant laws of the state, and do not use this product for illegal purposes, otherwise you will be responsible for the consequences
On Jun 20, 2022 at 23:05:17 PDT, seller added the following information: