8 Gang On Off Switch Panel Electronic Relay System for LED Light bar Driving Fog Cube Pods+4 Pods Rock Light Kit Bluetooth Music
If you have other equipment such as light bars, running lights, headlights, etc. installed in your car, and you need a wiring management masters, you can consider our 8 gang switch panel. One set of 8 gang switch panel can control eight sets of equipment at the same time, making your engine area more tidy, easy to use equipment and maintenance. 4-pack of Rock lights make your car look cooler, you can connect rock lights with 8 gang switch panel. The Rock lights have a memory function, and the last mode will automatically be displayed at the touch of a switch. You can also control the rock light with APP.
 

Specifications:

Input Voltage : 12-24V
DC Voltage : 30A
Imax:≤60A
Pout:600W-1200W
Rated voltage:12V 20A / 24V 10A
Operating temperature: -25°-80°
Tcase: -40°-+105°
Waterproof rating:IP65
Material: ABS+PC+Aluminum
Function:Toggle Momentary  Pulsed  
Switches Available: fog light, spot light, side light, roof light, zombie light, driving light, etc
With Adjustable Switch Panel Mount Bracket
 
 
 
- Customize Personal Panel: Customize unique personal switch panel with 50 universal switch stickers;Operating at 12 Volts;Switches 1-7 are limited to 5-20 amps,Switch 8 is limited to 30 amps.
 
 20%-100% Brightness Adjustable: Connect the "White Wire' to the Width/Position L amp or ACC or Car Cigarette Adaptor, then the backlit brightness can be adjusted in100% or 80% or 60% or 40% or even 20% brightness. Compared with ordinary switch panel, our will improve your off-road and night driving experience!
 
-  Multi-function Swith Panel: 3 lighting modes: Toggle - constant light, Momentary - When you press the button, the lights will light up, then release the button,the light will turn off, Pulsed - strobe mode. Not just "ON/OFF" switch panel for car, it can change the light color and lighting modes, control your device without extra switches or cables.
 
Safety First Design: Advanced thermal protection and overload protection design will help the loads work safely.Please note: Do not connect power to the power module until the 16 pin connector is plugged into the module and the ground wire is connected.
 
Quick and Easy Installation:Clean and Neat Design-No frustrating wiring.All wires are labeled in different colors,With plug and play wiring and easy-to-install components,wihich could solve the problem of the wiring for car lights,Professional installation is highly recommended.
 
Fitment:For jeeps Toyotas Trucks Utvs Boats Rvs Trailers Utility Trucks,etc.
 
Package included: 8 gang switch panel,switch stickers,wiring harness, mounting accessories, installation instruction and all required mounting hardware
 
 

Installation Guide:

Total power will go to 600w at 12V, 1200W at 24V and the maximum current is 60A.
The maximum output current of groud 1 & 2 is 30A, the maximum output current of ground 3-8 is 20A. The recommended connection method is to decrease the current gradually from groud 1 to 8 groud.
Make sure all the lamps are connectly before connecting the power cable.
 
 

Guideline for connecting the red and white control cables:

1. The red cable connects the master switch power cable to the ACC. If you want to light up the LED lamps before the car start-up, please connect the recommended because the higher the power is, the more the power of the battery will be consumed.
2. The white cable is the panel light brightness control cable. It can controls 5 levels of brightness levels by each switching. You can disconnect the white cable in order to have the most brightness swicth panel if require.
 
 

Package Included:

1 Set of 8 Gang on-off Control Switch Panel
Switch stickers,
Wiring harness,
Mounting accessories,
Installation instruction
Mounting brackets & hardware
 

FEATURES:
 
🌟 RGB multi-colors DIY Effect & High Power-As long as you install the APP, you can set your own lighting scenarios in advance by adjust the change speed, brightness,stroboscopic speed and music.The light follows the rhythm of the music.Driving will never be the same after using this rock light kit. 
 
🌟 APP control. 
 
🌟 Easy Installation-Scan the QR code on user manual or control box to download the app for installation, following the instruction and connect the Bluetooth and positioning system device to set your own lighting effect. Note: The white light is not the pure white light.
 
🌟 Universal Fitment- Fits for all DC 12-24V, the mini design that you can mount them at any place. Can be used as underbody light, wheel light, truck bed light, ambient light, etc. Perfectly fits for Off road lighting, camping, festival, music show, travel, Self-driving tour,etc. 
 
 
 
Specifications:
4 Pod RGB, Multicolor Bluetooth Music Control
Operating Voltage: DC 9V-32V(fit 12V/24V vehicles).
Beam Angle: 170 degree.
Protection Rate: IP68.
LED Quantity (each bulb): 3 x CREE LED chips, RGB.
Control Way:APP
Lifespan:Above 50,000 hours life time.
Mode: Classic color, strobe mode, breathe mode(Fadeing), music mode, DIY mode
Fitment: Off road,Jeeps,UTE,Cab,ATV,SUV,Truck,Boat,Bus.Sport Utility,4WD,4X4.Tractor,UTE,Van Camper,road roller,bulldozer,crane.You can use to decorate dining car, travel bus, garage
 
 
Package:
1x 4-Pods RGB Rock Lights
1XControl Box
2 X 4 Rubber Pods and screw set
PushAuction