Store Categories

Product View

Details

Description:
·Common backlight electronic symbol codes:
1. VCC: positive power supply voltage, circuit power supply voltage (generally 12V or 24V)
2. On / off, on, on, on BL: switch signal pin
3. PWM, PDIM, vdaj, bl-pwm: pin brightness adjustment
Ground (negative)
Led positive (lamp)
Negative pole of light emitting diode (lamp)
Application:
Product features:
·10-42 inch LED backlight driving board CC control board
·Pulse structure
·The conversion efficiency is over 92%
·The equipment has low heat dissipation, good stability and long service life
·PCB has small volume and exquisite design, and the current control error is within ± 5%
·You can use 12V power supply to reduce system cost!
·This product is a DC control board with automatic voltage regulation
·The temperature rise shall be controlled at about 25 degrees (temperature rise = equipment surface temperature - ambient temperature)
·Limit parameters:
At 24V input: Vout = 75V Vout = 720mA maximum or 60W
When the input voltage is 12V: Vout = 75V IOUT = 400mA maximum or 30W
reminder:
Limit parameter refers to the maximum capacity of the product during application. In fact, please use it under parameter limits to ensure the reliability of the product.
This product is a constant current board, which focuses on constant current and automatic voltage adjustment. The voltage is automatically adjusted according to the string of backlight modules. For example, the voltage is automatically adjusted to 3 when the backlight modules are 4 strings and 20 strings 2 V * 20 string = about 64V. Assuming that each LED current string is 60mA, you only need to set the current to 240mA to focus on this screen.
The magnetic ring wound with iron silicon aluminum material has large inductance, high temperature coefficient, large magnetic saturation and good stability. Due to the high conversion efficiency of the system, the device has very low heat, and the temperature is controlled at about 25 ℃ (Note: temperature = device surface temperature - ambient temperature), When the ambient surface temperature is between 25 ℃ and 50 ℃ (working conditions: input 24V, output 64v480ma).


Copyright©2018 datacaciques

Store Categories

Product View

Details

Description:
·Common backlight electronic symbol codes:
1. VCC: positive power supply voltage, circuit power supply voltage (generally 12V or 24V)
2. On / off, on, on, on BL: switch signal pin
3. PWM, PDIM, vdaj, bl-pwm: pin brightness adjustment
Ground (negative)
Led positive (lamp)
Negative pole of light emitting diode (lamp)
Application:
Product features:
·10-42 inch LED backlight driving board CC control board
·Pulse structure
·The conversion efficiency is over 92%
·The equipment has low heat dissipation, good stability and long service life
·PCB has small volume and exquisite design, and the current control error is within ± 5%
·You can use 12V power supply to reduce system cost!
·This product is a DC control board with automatic voltage regulation
·The temperature rise shall be controlled at about 25 degrees (temperature rise = equipment surface temperature - ambient temperature)
·Limit parameters:
At 24V input: Vout = 75V Vout = 720mA maximum or 60W
When the input voltage is 12V: Vout = 75V IOUT = 400mA maximum or 30W
reminder:
Limit parameter refers to the maximum capacity of the product during application. In fact, please use it under parameter limits to ensure the reliability of the product.
This product is a constant current board, which focuses on constant current and automatic voltage adjustment. The voltage is automatically adjusted according to the string of backlight modules. For example, the voltage is automatically adjusted to 3 when the backlight modules are 4 strings and 20 strings 2 V * 20 string = about 64V. Assuming that each LED current string is 60mA, you only need to set the current to 240mA to focus on this screen.
The magnetic ring wound with iron silicon aluminum material has large inductance, high temperature coefficient, large magnetic saturation and good stability. Due to the high conversion efficiency of the system, the device has very low heat, and the temperature is controlled at about 25 ℃ (Note: temperature = device surface temperature - ambient temperature), When the ambient surface temperature is between 25 ℃ and 50 ℃ (working conditions: input 24V, output 64v480ma).

We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

-We ship items to Worldwide. Thank you!

-we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.

We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

DataCaciques