|
|
|
|
|
|
|
|
|
|
NOTE
Some package content may not include batteries for the restriction of some logistics
SPECIFICATION
Size: 175x70x29 mm
Length of testing rod: 134 mm
Weight: About 160g
Power supply: 1 x 9V (6F22) Battery
Function: test the quality of brake fluid to ensure wheter it's safe or not to drive.
OPERATION INSTRUCTION
CALIBRATION PROCEDURE——before testing
1. Clean and dry the test head
2. Insert the test head into the new brake fluid about 2 cm deep, or expose it in the dry air
Note: The new brake fluid should be the one that will be tested.
3. Press and hold the "ON" button, for about 3 seconds later, use screwdriver to adjust the adjustor and stop until the first green LED lights.
Note: Don't release the "ON" button until the calibration is finished.
TEST PROCEDURE
1. Clean and dry the test head(including two poles) and test rod.
2. Insert the test head into the brake fluid to be tested about 2cm deep.
3. Press and hold the "ON" button for about 3 seconds, then read the LED indication:
two green LEDs light → gooo quality
yellow LED lights → bad quality
red LED lights + the built-in buzzer sounds → deteriorated and unsafe to use.
4. After testing, clean and dry the test head.
FEATURES
Replace Battery — LEDs flash and the built-in buzzer sounds under the situation of power-on and nothing being tested.
Each time, calibrate the tester before testing
PACKAGE
1 x Instruction Manual
1 x Skin Packing
1 x Item EM 283A
Item Specifics | |
---|---|
Modified Item | No |
OBD Interface | None |
Country/Region of Manufacture | China |
Custom Bundle | No |
UPC | 788537552437 |
Type | Brake Fulid Tester |
Manufacturer Part Number | EM283A |
Vehicle Type | Passenger Vehicle |
Brand | allsun |
Non-Domestic Product | No |
Warranty | 1 Year |
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;
4.International buyers please note:
a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
Please feel free to contact us via eBay or e-Mail if you have any question. We will reply within 24 hours in working day.
Shop Category |
Auto Brake Fluid Tester LED Quality 180°Pucker in Buzzer Diagnostic Tool
NOTE Some package content may not include batteries for the restriction of some logistics
SPECIFICATION Size: 175x70x29 mm Length of testing rod: 134 mm Weight: About 160g Power supply: 1 x 9V (6F22) Battery Function: test the quality of brake fluid to ensure wheter it's safe or not to drive.
OPERATION INSTRUCTION CALIBRATION PROCEDURE——before testing 1. Clean and dry the test head 2. Insert the test head into the new brake fluid about 2 cm deep, or expose it in the dry air Note: The new brake fluid should be the one that will be tested. 3. Press and hold the "ON" button, for about 3 seconds later, use screwdriver to adjust the adjustor and stop until the first green LED lights. Note: Don't release the "ON" button until the calibration is finished. TEST PROCEDURE 1. Clean and dry the test head(including two poles) and test rod. 2. Insert the test head into the brake fluid to be tested about 2cm deep. 3. Press and hold the "ON" button for about 3 seconds, then read the LED indication: two green LEDs light → gooo quality yellow LED lights → bad quality red LED lights + the built-in buzzer sounds → deteriorated and unsafe to use. 4. After testing, clean and dry the test head.
FEATURES Replace Battery — LEDs flash and the built-in buzzer sounds under the situation of power-on and nothing being tested. Each time, calibrate the tester before testing
PACKAGE 1 x Instruction Manual 1 x Skin Packing 1 x Item EM 283A
All rights reserved. |