HM10 FEATURES AND ADVANTAGES

1.

1024*768 color LCD display, full viewing angle display, 10-level brightness adjustment;

2.

The vertical button layout on the right side satisfies the quick operation of various scenarios;

3.

30-second blood pressure measurement, performance, function, all-around;

4.

ECG 12-core anti-interference socket design;

5.

There are three filtering modes of monitoring, diagnosis and surgery, to satisfy various scenarios;

6.

There are more than three ways to enter the alarm limit setting, and there is no need to operate too much for newly received patients;

7.

Support fast import/export of USB configuration to meet the needs of different departments;

8.

Large storage capacity: it can meet the data storage requirements of continuous patient monitoring for at least 1200 hours;

9.

With blood pressure STAT measurement mode, it will automatically exit after 5 minutes of continuous measurement;

10.

With automatic blood pressure measurement interval time adjustment above level 10, to meet the needs of different patients for monitoring;

11.

Operation interface in more than 5 languages; convenient operation of patient information entry\delete\save;

12.

20 kinds of arrhythmia event alarms, support ST segment analysis function;

13.

Trigger the printing function, record every abnormality in time; improve the communication efficiency between nurses and doctors (optional);

14.

Trigger the printing function, record every abnormality in time; improve the communication efficiency between nurses and doctors (optional);

15.

Super long alarm light, 360-degree visibility, easier to monitor patient status information;

16.

 The alarm sound and the pulse rate sound are independent, the pulse rate sound continues to respond when the alarm is muted, and the alarm sound can be activated normally when the pulse rate sound is muted;

17.

The waveform display has two ways of curve and filling to meet the needs of different departments;

18.

Large-capacity built-in lithium battery, continuous working time ≥ 300 minutes;

19.

When the waveform screen is frozen, the real-time parameters are continuously displayed in the parameter area; the frozen waveform can be viewed forward and backward along the time axis.

20.

Anti-defibrillation, anti-electric knife, anti-power grid, anti-myoelectric and other interference;

21.

Low battery alarm, no data loss at critical moments;

22. Support USB firmware upgrade outside the machine, get rid of local restrictions;

22.

Support USB firmware upgrade outside the machine, get rid of local restrictions;

TECHNICAL PARAMETER

ECG

Lead selection

three/five lead standard; up to 7 leads can be displayed on the same screen

I, II, III, AVR, AVL, AVF, V chest leads

ECG detection range

15~350bpm

Resolution

1bpm

Measurement accuracy

the greater of ±2% or ±2bpm

Frequency Response

0.67Hz-40 Hz

S-T segment monitoring

-2.0mV~2.0mV

Electrode drop indication

sound, light prompt

Scanning speed

6.25, 12.5, 25, 50mm/sec

Gain selection

×0.125, ×0.25, ×0.5, ×1, ×2, ×4, auto

ECG calibration

1mV+5%

Protective isolation withstands

4000V/AC/50Hz voltage;

ECG cable lead wire

3/5 lead

Standard configuration

adult universal ECG cable

Optional configuration

ECG cable for pediatric and neonatal

Alarm

The upper and lower limits of the alarm value can be set and automatically memorized; there is an alarm review;

BLOOD OXYGEN SATURATION

Display

blood oxygen value, pulse histogram, waveform, pulse value

Blood oxygen range

0%-100% adult/child/neonatal

Resolution

1%

Accuracy

±3% (Undefined below 70%)

Pulse rate

Measuring range

30～280bpm

Pulse accuracy

±2bpm

Alarm range

20～300bpm, the lower limit cannot be greater than the upper limit

Sensor

Standard configuration

adult soft finger ring

Optional configuration

soft finger ring for pediatric, neonatal strap

Alarm value

upper and lower limits can be set, automatic memory