Auto-supermark

Your Best Online Business Partner

Shop Category
 Store Home
 Other
Hot Item
New List Item
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Fits For all 78-88 GM G-Body Rear Frame Notching Kit - Weld-In DIY

Description

CNC cut to fit all G Body frames. Made from Premium Grade 1/8" (.120") Pickled and oiled steel (HRPO).

This comes with both right and left frame sections and ends to bridge the gap from the notch.
This is thicker and stronger than the factory frame.
This kit requires metal fab experience and can be done in the garage with a decent welder.
Will need a welder, hammer, die grinder and a bench vice.
Due to the Lack of consistency with the G Body frame over the years some minor trimming and will be necessary.
Fit For:
1978 - 1988 Chevrolet Monte Carlo, Malibu, El Camino
1978 - 1988 Buick Regal, Grand National
1978 - 1988 Pontiac Grand Prix, LeMans
1978 - 1988 Oldsmobile Cutlass

(1) Raise car to a comfortable working height using the method of your choice. Follow applicable safety procedures.
(2) Locate the existing rear frame that will be sliced and re-boxed  
(3) Suggests marking the length of your cut based on the wheel you are trying to accommodate. Mark a long enough frame section to allow your wheel proper clearance.
(4) The depth of the notch is also dependent on the desired wheel clearance. As a good starting point,slicing the frame flush with the inner fender.
(5) Keep in mind it is always best to cut less to begin with and grind to exact fit rather than trying to cut to exact dimensions.
 (6) Use a vise and a hammer to bend the four smaller frame plates until they match the shape of the notch ends. Tack weld small plates into place.
(7) In preparation for welding, trim the large plates so they slightly overlap the small end plates.
(8) Before welding the large main plates, clamp them into place and check for good seams to place weld bead. The plate is slightly oversized to allow proper fit to all 78-88 G-body frames. Grind large plate for perfect fit.
(9) First, properly clean the existing frame of dirt and rust to expose bare metal for the welding process. Weld small end plates in place first, and then weld the larger plates.
(10) Installation is complete.

Item Specifics
Brand :Unbranded
Placement on Vehicle :Rear
Type :Control Arm Repair Kit
Items Included :Nut
Features :Heavy Duty
Material :Steel
Manufacturer Warranty :6 Months
Performance Part :Yes
Universal Fitment :Yes
Vintage Car Part :Yes
Cotter Pin Hole :Yes
Item Weight :5.783


​Dear customer,if you have any questions,you can contact us,we will provide the best service for you.

The item will be shipped within 24 hours on payment received except the holidays.(except weekends & official holidays).

You can log on to eBay to check your logistics tracking number.Please confirm address before purchase, and cannot change address once purchased.

If you need to receive the item quickly, please contact us, you can pay the postage to choose other logistics.

Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.

Item must be returned in new condition, as received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect.

If the product is defective or damage upon arrival,please contact us immediately,we will provide the solve the problem. Returns accepted within 30 days of delivery date and item must be in original new condition.

Our goal is complete customer satisfaction. We will be very honored to provide you with quality service.

If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.


All rights reserved.