| Input Voltage: | | 2x 2s/3s LiPo (Max 25.2 volts)
2x 7-cell/8-cell NiMH* |
| Case Size: | | 2.23in (58mm) x 2.83in (72mm) x 1.81in (46mm) |
| Weight: | | 206.5g (7.28oz) |
| Motor Connectors: | | Traxxas 6.5mm Bullet Connectors |
| On Resistance Forward: | | 0.00075 Ohms |
| On Resistance Reverse: | | 0.00075 Ohms |
| BEC Voltage: | | 6.0 V |
| BEC Continuous Current: | | 10A |
| BEC Peak Current: | | 20A |
| Power Wire: | | 10-Gauge Maxx® Cable |
| Input Harness Wire: | | 26 Gauge / 295mm |
| Low Voltage Detection: | | 2-Stage indicators, switchable (on or off) |
| Thermal Protection: | | 2-Stage thermal shutdown |
| Profile selection: | | Sport Mode:
100% FWD, 100% BRAKES, 100% REV
Race Mode:
100% FWD, 100% BRAKES, NO REV
Training Mode:**
50% FWD, 100% BRAKES, 50% REV |
| Single-Button Setup: | | Yes, Traxxas EZ-Set® |
| Battery Input Connector : | | Traxxas High-Current Connector |
| Motor Types : | | Brushless |
| Ports: | | RX input, auxiliary fan, Traxxas accessory port |
| | | *Low Voltage Detection must be disabled with NiMH batteries. NiMH support depends on vehicle. **Patented |