integratemote
50A /100A must be used with a shunt
M430 is a voltage, current and power measuring instrument. It can only measure and display the voltage, current and power of the circuit under test. The displayed value can be fine-tuned through an adjustable resistance. It does not have the functions of buck-boost or current limiting. The actual voltage and current of the loop has no effect.
Do not use high voltage above 30V when using, otherwise it will cause overvoltage damage to the product.
The 10A range product comes with a shunt resistor, and there will be a short circuit at the test end of the direct current measurement. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally.
50A/100A range products need an external shunt for normal use. After connecting the shunt, there will be a short circuit at the test terminal to directly measure the current. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally.
According to different current ranges, it is divided into 10A, 50A, 100A.
The thin red wire is the positive pole of the working power supply, and the thin black wire is the negative pole of the working power supply, which belongs to the common ground with the thick black wire;
When using, the limit voltage connected to the thin red and black wires cannot exceed 30V, and 12V power supply is recommended
10A: Voltage measurement range is 0~100V, display mode below 10V is 0.00V, voltage starts at 0.2V, error range is ±1V, current measurement range is 0~10A, current starts at 0.03A, error is ±0.1A
DC0.20V~9.99~10.0~100V (±1M)
DC0.03A~9.99A (±0.1)
DC0.20V~9.99~10.0~10OV (±1V)
DC0.03A~9.99~50.0A (±0.5A)
DC0.20V~9.99~10.0~100V(±1V)
DC0.03A~9.99~100A (±1A)
2* power supply load line
M520 Blue/Red 5-30V 10A 4 Wire
Do not work with high voltage above 20V during use, otherwise it will easily cause overvoltage damage to the product.
The 10A range product comes with a shunt resistor, and there will be a short circuit at the test end of the direct current measurement. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally.
This only has a 10A range, no 50A and 100A ranges.
The working voltage of the instrument is DC 5~30V, and 5~12V is recommended.
The thin red wire is the positive pole of the working power supply, and the thin black wire is the negative pole of the working power supply, which belongs to the common ground with the thick black wire; the limit voltage connected to the thin red and black wire cannot exceed 24V, and 12V power supply is recommended.
The voltage measurement range is 0~100V, the display mode below 10V is 0.0V, the voltage starts from 0.1V, the error range is ±1V, the current measurement range is 0~10A, the current starts from 0.03A, and the error starts from ±3%
On-board shunt resistor, no need for external shunt, just use it directly according to the wiring diagram
The shunt resistance is connected in parallel with the current test line, and the no-load test will cause a short circuit alarm. When using, connect the thick red line to the negative pole of the load according to the wiring diagram for normal use.
XH-2.54-3P red, black and yellow wire (total length of thin wire: 155mm)
Thin red wire: positive pole of the working power supply, can not be connected to a power supply above 30V
Thin black wire: the negative pole of the working power supply, and the thick black wire on the construction site, do not need to be connected when sharing the power supply
Thin yellow wire: voltage test wire, connected to the positive pole of the test circuit power supply
Thick red wire: the positive pole of the current test, which is connected to the negative pole of the load.
Thick black wire: current test negative pole, connect to power supply negative pole, connect first and then break when disconnected
It is a display fine adjustment, not a major adjustment, the adjustment is the display voltage, but the actual voltage cannot be adjusted!
See the round adjustable resistor of V-ADJ, find a flat-blade screwdriver and twist it!
Neither does this feature!
Real-time power will alternate with current (about 10 seconds alternate)
1*Voltage current power meter
1*Power cable
1*Load line
100V 10A Voltmeter Ammeter
Working voltage of Meter itself: DC 4 - 30V(The maximum input voltage can not exceed 30V. Otherwise the meter will be burned)
Working current of Meter itself: ≤20mA
Voltage Measuring range: DC 0 - 100V
Current Measuring range: DC 0 - 10A
Voltage resolution (V): 0.1V
Current resolution (A): 0.01A
Measure accuracy: 1% (± 1 digit)
Display: 0.28" digital tube, Two color blue and red
Refresh rate: about 300mS / times
Dimensions:48mm*29mm*26mm
Operation Temp: -10℃ ~ +65℃
Package Included:
1 x DC 100V 10A Dual Digital Red&Blue LED Voltmeter Ammeter
1.A large number of products for you to choose
2.We have an independent customer service team to quickly answer your questions
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 28.10.2022 hat der Verkäufer die folgenden Angaben hinzugefügt: