A Set of 16 Good Quality Closed End Replacement Wheel Nuts

Specified to fit Triumph models listed below with Factory Fitted Original wheels - Please NOTE these cars are 50 years old and wheel types & wheel studs could have been upgraded so please compare seating, thread and size before fitment. These are 7/16 UNF with a 60 degree taper.

It is also worth noting these are closed end so ensure the nut grips the wheel and does not bottom out on the thread, they are 31mm deep from the seating, Also some models may have used a sleeved nut to hold hubcaps in place, please note the are NOT sleeved nuts they are the standard profile as show in the picture.


Triumph TR4 models from 1961 to 1965

Triumph TR4-A models from 1965 to 1967

Triumph TR5 models from 1967 to 1968

Triumph TR6 models from 1969 to 1976

This Ad is for a Set of 16 Nuts

Technical Specification

Chrome Plated, 7/16 UNF Thread, 31mm Deep with closed end, Taper Seat & Uses a 19mm Socket/Wrench

Important Information

Always compare the seating and thread with the original equipment fitted, The Manufacturer Strongly recommends that each installation should be inspected during fitment and thoroughly checked after fitment (by spinning the wheel if necessary) after 200 miles or 300km use. Torque settings should be in accordance with vehicle manufacturers recommendations. If you are unsure about any aspect of fitting do not attempt to fit but contact your local dealer. Your wheel hubs or brakes may be adversely affected by wrongly fitted wheel nuts. Do not use air guns to fit.

Fitment: If no choices are shown in the compatibility "Notes" field then this product should be correct for the vehicle you have selected. If you need any help please contact us through the "contact seller" tab, please include your vehicle registration number and the parts you require, we can then send you links to the correct items for your vehicle. 

Legal Information & Product Fitment – All data in this ad is taken via third party databases, the company makes every effort to ensure the listings are accurate but responsibility will not be accepted for errors or omissions with-in the listings. You should always check the product being fitted against the part being removed and check that they are of the same specification, if you are unsure you should consult your vehicle dealership for advice. “The Company” cannot be held responsible for any consequential loss or damage caused by the incorrect fitting of a part or fitting a part that is not suitable for the vehicle application – If you are unsure you should always seek the advice and opinion of a qualified vehicle mechanic.  Any purchase made through this ad constitutes the acceptance of these terms and conditions.