Features
Brand New and high quality.
Easy to install, Temperature is adjustable.
Min Tempt: 50 Degrees C.
Max Temp: 70 Degrees C.
Push it to Increase the Temperature. Retreat is to
reduce the Temperature, Back End to off.
Everything in the image is included.
Instructions is on the packing box.
The aluminum ring fixed to the left, the situation is more secure, more secure.
Wear non-slip handle sets.

Specifications
Left Grip Hole Diameter: 22mm/7/8"
Right Grip Hole Diameter: 25mm/1"
Left Grip Length: 12.8cm/5.04"
Right Grip Length: 13.5cm/5.31"
Red wire:DC+12 cothodes (positive)
Black wire:DC-12 anode (negative)
Power:12W-24W
Working voltage:12V
Color: Black

Package include
A pair Motorcycle heated grips.

Fitment
Fit for most of 12V 22mm motorcycle/ATV handlebar.

Installation Instructions
1.Remove the original handlebars.
2.Moisten the hole in the left handlebar with soapy water. Don't twist it too much during installing.
3.When install the balancing iron piece to the left handlebar, adjust it a little away from the handlebar. Do not aqueeze the handlebar while tighten the screws.
4.Remove the balancing iron piece, and apply adhesive to the end of handlebar to stick firmly,if the left handlebar slides on the steel tube during use.
5.Connect the red wire to positive pole, the black to the negative pole. The temperature can not be adjusted if connected wrong.
6.Allow enough length of power wire for turning when install the right handlebar.

Installation Notes
1.When you install the left heated grips, please don't Over twist, or will result the electric wire shift.
2.If you want the hand grips with bar ends, please adjust the installation position of the head, tighten the screws from time to time do not squeeze the hand, between the head and hands have a little separated. If the excessive squeeze hand, result in hand switch difficult and electric wire out of the surface of the handle etc. damaging.