LM2596S DC-DC Step-down Power Regulator Module Board 3A Output 12/5/3.3V
1. Using high-quality materials, the quality is guaranteed
2. The calorific value is small, and it can carry a current of more than 3A (for a short time). It is recommended to use a current within 2-2.5A for long-term work.
3. This module uses machine patch and reflow soldering, and each module has undergone an aging test before shipment to ensure high reliability
4. Output ripple voltage as low as 30mV
5. The appearance of the product is exquisite
Input voltage: 3.2V~40V
Output voltage: 3.3V
Output current: 3A (not more than) using actual test within 2A for long-distance running
Conversion efficiency: 92% (not exceeding)
Output ripple: <30mV
Switching frequency: 65KHz
Working temperature: -45℃~ +85℃
Input voltage: 3.2V~40V
Output voltage: 5V
Output current: 3A (not more than) using actual test within 2A for long-distance running
Conversion efficiency: 92% (not exceeding)
Output ripple: <30mV
Switching frequency: 65KHz
Working temperature: -45℃~ +85℃
Input voltage: 3.2V~40V
Output voltage: 12V
Output current: 3A (not more than) using actual test within 2A for long-distance running
Conversion efficiency: 92% (not exceeding)
Output ripple: <30mV
Switching frequency: 65KHz
Working temperature: -45℃~ +85℃
IN+ input positive IN- input negative
OUT+ output positive OUT- output negative
Input voltage range: DC 3.2V to 40V (the input voltage must be more than 1.5V higher than the output voltage, and cannot be boosted)
Output voltage range: DC 3.3V or 5V fixed voltage output, high efficiency (maximum 92%), maximum output current is 3A, (no-load debugging is recommended)
The measured load regulation rate is less than 1% when 12V input and 5V output current are 1A
Note: This is a step-down module, the input voltage must be higher than the output voltage, the output below 2A can be used for a long time without adding a heat sink, the output current is greater than 2.5A or the output power is greater than 10W, please add a heat sink for long-term work
Turn it counterclockwise to reduce the pressure, it doesn't reflect at first, and it starts to change after 10-20 laps.
Module X1
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting, since the recovery
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less)
Full load temperature rise: 40
Load regulation: ± 0.5%
Voltage regulation: ± 2.5%
Input voltage:4-35V
Output voltage:1.23-30V(Adjustable)
Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)
Dimension:48*23*14mm(L*W*H)
1PCS* LM2596 DC-DC Buck Converter step-down module NEW
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
1. Using high-quality materials, the quality is guaranteed
2. The calorific value is small, and it can carry a current of more than 3A (for a short time). It is recommended to use a current within 2-2.5A for long-term work.
3. This module uses machine patch and reflow soldering, and each module has undergone an aging test before shipment to ensure high reliability
4. Output ripple voltage as low as 30mV
5. The appearance of the product is exquisite
Input voltage: 3.2V~40V
Output voltage: 3.3V
Output current: 3A (not more than) using actual test within 2A for long-distance running
Conversion efficiency: 92% (not exceeding)
Output ripple: <30mV
Switching frequency: 65KHz
Working temperature: -45℃~ +85℃
Input voltage: 3.2V~40V
Output voltage: 5V
Output current: 3A (not more than) using actual test within 2A for long-distance running
Conversion efficiency: 92% (not exceeding)
Output ripple: <30mV
Switching frequency: 65KHz
Working temperature: -45℃~ +85℃
Input voltage: 3.2V~40V
Output voltage: 12V
Output current: 3A (not more than) using actual test within 2A for long-distance running
Conversion efficiency: 92% (not exceeding)
Output ripple: <30mV
Switching frequency: 65KHz
Working temperature: -45℃~ +85℃
IN+ input positive IN- input negative
OUT+ output positive OUT- output negative
Input voltage range: DC 3.2V to 40V (the input voltage must be more than 1.5V higher than the output voltage, and cannot be boosted)
Output voltage range: DC 3.3V or 5V fixed voltage output, high efficiency (maximum 92%), maximum output current is 3A, (no-load debugging is recommended)
The measured load regulation rate is less than 1% when 12V input and 5V output current are 1A
Note: This is a step-down module, the input voltage must be higher than the output voltage, the output below 2A can be used for a long time without adding a heat sink, the output current is greater than 2.5A or the output power is greater than 10W, please add a heat sink for long-term work
Turn it counterclockwise to reduce the pressure, it doesn't reflect at first, and it starts to change after 10-20 laps.
Module X1
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting, since the recovery
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less)
Full load temperature rise: 40
Load regulation: ± 0.5%
Voltage regulation: ± 2.5%
Input voltage:4-35V
Output voltage:1.23-30V(Adjustable)
Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)
Dimension:48*23*14mm(L*W*H)
1PCS* LM2596 DC-DC Buck Converter step-down module NEW
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 13.07.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 16.08.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 01.09.2022 hat der Verkäufer die folgenden Angaben hinzugefügt: