Description:
This listing is for a Brand New Deluxe Tire Grooving Kit(Part #HSD-T100). The HSD-T100 comes with a starter assortment of blades. It operates on 110 volts. This deluxe groover is instantly hot. You don't have to wait for it to heat up to begin grooving. When you plug the HSD-T100 in, it instantly heats to the setting on the dial, which has adjustable heat settings 1 through 4.
This kit is great for numerous applications including race car tires, truck tires, motorcycle tires, karting tires, ATV tires, industrial tires, etc. Essentially, this groover is your easiest and most accurate choice for any tire grooving application.
For operation video, please click here
Operation Instruction
To check if the power supply conform to the standard of the tyre groover.
Place the tire groover in a smooth and steady site before use.
Open the power switch, See whether work lamp light. Temperature control switch is set to half, Voltage gear to three gears.
The blade should not be dry, fixed knife carving depth and reveal some depth.
Two copper head clip blade contact point is not allowed to together, otherwise the host easily damaged.
When operating the machine, hold the handle, the front blade position downward, the blade will become red after three to five seconds.
It is the electricity(pay attention to loosen the handle immediately, after a long time will burn out the blade.
On the job, cannot push hard, make an effort to push.
The HSD-T100 Deluxe Grooves comes with all parts necessary to begin grooving, as well as a starter assortment of blades including:
2 - U-Type Blades, 2mm Wide
2 - U-Type Blades, 4mm Wide
2 - U-Type Blades, 6mm Wide
2 - U-Type Blades, 8mm Wide
2 - U-Type Blades, 10mm Wide
2 - V-Type Blades, 2mm Wide
2 - V-Type Blades, 4mm Wide
2 - V-Type Blades, 6mm Wide
2 - V-Type Blades, 8mm Wide
2 - V-Type Blades, 10mm Wide
Features:
1. Instantly heat, stop using without heating.
2. The body is made of anti-impact and corrosion-resistant materials, which is easy to use, low in power consumption and good in thermal effect.
3. It is safe to use with 24v DC power supply.
4. Intelligent temperature regulation, voltage overload protection, air cooling technology, low voltage electric shock technology, power line plus PV material package insulation waterproof.
5. The rubber grooving machine can engrave a pattern of 3-20mm wide and 7-16mm deep on the rubber surface, and comes with a blade heating system.
Specifications:
Model: HSD-T100
Input Power: 110V/60Hz
Maximum power: 400W
Host specification: 230×100×102mm (9"×3.94"×4")
Tool holder handle: 200×38mm (7.8"×1.5")
Movement mode: manual
Blade specifications: 2-10mm
Gross weight: 8KG
Package size: 38×28×25cm
Note:
(1) When removing the plug, be sure to hold the plug and do not hold the power cord pull.
(2) Do not place heavy objects on top of the power supply. Do not squeeze the power cord.
(3) If the power cord is damaged, it must be replaced by the manufacturer or its maintenance department or a similarly qualified person to avoid danger.
(4) Do not plug or unplug the power plug with wet hands.
(5) Do not plug or unplug the power cord where there is a gas leak.
(6) Use a standard, reliable AC grounded outlet.
Package Content:
1 × Tire Groover Machine
1 × English Manual
2 x U-Type 2mm blades
2 x U-Type 4mm blades
2 x U-Type 6mm blades
2 x U-Type 8mm blades
2 x U-Type 10mm blades
2 x V-Type 2mm blades
2 x V-Type 4mm blades
2 x V-Type 6mm blades
2 x V-Type 8mm blades
2 x V-Type 10mm blades