eBay

The following filaments are 100% neatly wound -- PLA/PLA+/PLA Meta/PETG /SILK PLA+ (ABS/TPU/PLA Marble is not included.)
Filament	Wire diameter	Tolerance	Printing temperature	Print speed	Heat bed temperature	Elongation at break	Net weight
PLA	1.75mm	±0.02mm	200-210℃	50-100mm/s	53℃	4%	1.1KG/Roll
PLA Meta	1.75mm	±0.02mm	185-195℃	50-150mm/s	53℃	35%	1.1KG/Roll
PLA Matte	1.75mm	±0.02mm	205-215℃	50-100mm/s	53℃	4%	1.1KG/Roll
PLA HighSpeed	1.75mm	±0.02mm	190-210℃	190-210℃, 50-150mm/s 210-230℃,150-300mm/s 230-260℃,300-600mm/s	53℃	3.6%	1.1KG/Roll
PLA Glow	1.75mm	±0.02mm	200-210℃	50-100mm/s	53℃	21%	1.1KG/Roll
PLA Carbon fibre	1.75mm	±0.02mm	215-225℃(YF) 205-215℃(TY)	40-60mm/s	53℃	3%	1.1KG/Roll
PLA Marble	1.75mm	±0.03mm	210-220℃	40-60mm/s	53℃	4%	1.1KG/Roll
Wood	1.75mm	±0.03mm	205-215℃	40-60mm/s	53℃	4%	1.1KG/Roll
PLA+	1.75mm	±0.02mm	205-215℃	50-100mm/s	53℃	45%	1.1KG/Roll
PETG	1.75mm	±0.02mm	200-230℃	40-60mm/s	63℃	210%	1.1KG/Roll
SILK PLA+	1.75mm	±0.02mm	205-215℃	40-60mm/s	53℃	200%	1.1KG/Roll
TPU (95A)	1.75mm	±0.03mm	195-205℃	Proximale Extrusion:40mm/s Ferngesteuerte Extrusion:20mm/s	52℃	600%	0.5KG/Roll
TPU SILK(98A)	1.75mm	±0.03mm	210-220℃	Proximale Extrusion:50mm/s Ferngesteuerte Extrusion:30mm/s	131℃	463%	1.1KG/Roll
ABS	1.75mm	±0.03mm	250-260℃	40-60mm/s	84℃	25%	0.65KG/Roll
Easy ABS	1.75mm	±0.03mm	225-235℃	40-60mm/s	57.9℃	20%	0.65KG/Roll

About this product:

【JAYO Filament 1.75mm】JAYO 3D printed fine filament uses advanced production technology to deliver an incredible 3D printing experience. Clean lines, precise dimensionality, low shrinkage and excellent adhesion make printing easier.

【Neatly wound filaments】JAYO's leading production process - neatly threaded filaments prevent filaments from tangling, twisting or breaking during printing, reducing the risk of clogging and greatly increasing print success.

【High dimensional accuracy and consistency】JAYO 3D printer filament diameter is 1.75 mm, and the dimensional accuracy is +/- 0.02mm, which is almost suitable for FDM 3D printers.This includes Creality Ender 3 V3.

【No clogging and no air bubbles】JAYO 1.75mm filament has better flowability and effectively reduces clogging when printing. Plastic vacuum packaging and desiccant make the filament less susceptible to moisture.

【High Compatibility & Easy Operation】Compatible with 99% of FDM 3D printers and 3D pens on the market. JAYO fine filament's excellent stability is suitable for beginners and advanced users.

How to store:
1.If you leave your printer idle for more than a few days, please retract the filament to protect your printer nozzle.
2.In order to extend the life of your filament, please put the unsealed filament back into the original vacuum bag and store in a cool and dry place after printing.
3.When storing your filament, please pass the loose end through the holes on the edge of the filament spool to avoid coiling, so that it will be fed properly for the next use.