Zahlungspolitik Versandbedingungen Rücknahmegarantie FAQ Über uns |
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm Remove Trim/Tilt Caps, Trim Seals on Hydraulic Cylinders for Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards
Features: - Application--for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units,All Suzuki, Honda,Johnson, Evinrude,ALL Yamaha I4 2.8L (F175-F200),ALL Yamaha VMAX,Yamaha F115-F150,Yamaha 2-Strokes (115-225hp)
- Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
- A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
- High Quality Material--Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.
- Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0006, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty
Product description: ![](https://m.media-amazon.com/images/S/aplus-media/sc/644e1ad8-b9b8-471c-88f6-e76a3c427e80.__CR0,0,1500,928_PT0_SX970_V1___.jpg)
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm - Used for removing Trim/Tilt Cylinder Caps on ALL SHOWA manufactured Trim/Tilt Units,
- All Suzuki, Honda,Johnson, Evinrude,
- ALL Yamaha I4 2.8L (F175-F200),
- ALL Yamaha VMAX, Yamaha F115-F150, Yamaha 2-Strokes (115-225hp)
![](https://www.cdnclouds.net/np/EVsOT7XQar41/unOEyZ9ryq975BohywPfwjODp46qLwKh2mF1MiUg0b0SCsydbLx/_1.png)
WHY YOU NEED THIS PIN WRENCH???? - Usually,you will put a little drift into one of those holes with a hammer
- Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks.
- So, you really need the pin wrench to help you finish that case with ease
Come with 2 sets of pins 4 & 4.5 - MIN Pin Strength: -180 ft-lb
- Included: 3x 4mm pins; 3x 4.5mm pins
- Replacement Pins: AMT0005 - S-4mm
Easy to Use - To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .
- Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
- Used with 1/2" socket drive
- Yamaha Factory Tool:YB-06175-1A, YB-06548
1. Alle gängigen Kreditkarten werden von unserem sicheren Zahlungsprozessor Payoneer akzeptiert.
2. Wir versenden Artikel an Ihre Ebay-Adresse. Bitte stellen Sie sicher, dass Ihre Ebay-Adresse korrekt ist, bevor Sie bezahlen, da sie nach Abschluss der Zahlung nicht mehr geändert werden kann.
1. Der Artikel wird innerhalb von 1-2 Werktagen nach Zahlungseingang versandt.
2. Bitte stellen Sie sicher, dass die Lieferadresse in Ihrem Ebay-Konto korrekt und aktuell ist.
3. Alle unsere Artikel werden von unserem Lager aus versendet.
4. Bitte zögern Sie nicht, uns per Ebay-Nachricht zu kontaktieren, wenn Sie irgendwelche Probleme haben.
1. Senden Sie uns innerhalb von 30 Tagen ab Lieferdatum zum Umtausch oder zur Rückerstattung zurück. Die Rückerstattung erfolgt als Geld-zurück- oder Artikelumtausch (Wahl des Käufers).
2. Die Rücksendegebühr liegt in der Verantwortung des Käufers, es sei denn, die Rücksendung ist auf unseren Fehler zurückzuführen.
3. Wenn Sie eine Rücksendung benötigen, wenden Sie sich bitte an unseren Kundendienstmitarbeiter, teilen Sie uns das detaillierte Problem mit und senden Sie uns einige Bilder zur Bestätigung.
Bitte kontaktieren Sie uns über ebay über "Mitglied kontaktieren". Wir werden innerhalb von 1 Werktag oder weniger antworten. Vielen Dank für Ihr Verständnis.
|