Supermicro CSE-828 2042G-TRF 256GB 4 x AMD Opteron OS6274 6-Bay 3.5" 2U Server

Chassis Part number: 2042G-TRF
Model: SuperServer CSE-828
Motherboard Part number: H8QGi-F

In Good Condition And Full Working Order

Manufacturer Server Chassis Specification:

Motherboard Super H8QGi-F   Processor/Chipset CPU Quad 1944-pin Socket G34 Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support Chipset AMD SR5690/SR5670/SP5100 Chipset   System Memory Memory Capacity 32 DIMM sockets Support up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs Quad channel memory bus For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix Memory Type Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB, 8GB, 16GB, 32GB Memory Voltage 1.35V or 1.5V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices SATA AMD SP5100 (RAID 0, 1, 10) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC Network Controllers Intel® 82576 controller, Dual-Port   Gigabit Ethernet 10/100/1000BASE-T support VGA Matrox G200 16MB DDR2 graphics Super I/O Winbond® W83527 chip   Input / Output SATA 6x SATA2.0 (3Gb/s) Ports LAN 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI USB 7x USB 2.0 ports 2x Rear, 4x internal header, and 1x type A VGA 1x VGA port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Ports 1x Fast UART 16550 serial port 1x serial port header   Expansion Slots PCI-Express 2x PCI-e 2.0 x16 2x PCI-e 2.0 x8 1x UIO slot   System BIOS BIOS Type 16Mb SPI Flash ROM with AMI® BIOS BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3

Chassis Form Factor 2U Rackmount Model SC828TQ+-R1400LPB   Dimensions Height 3.5" (89mm) Width 17.2" (437mm) Depth 27.9" (709mm) Gross Weight 69 lbs (31.3kg) Available Colors Black   Front Panel Buttons • Power On/Off button • System Reset button LEDs • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power fail LED Ports 2x USB Ports + DB9 COM Port   Drive Bays Hot-swap 6x 3.5" SATA Hot-swap drive trays Enterprise SATA HDD only recommended   SAS / SATA Backplane 1x 2U SAS / SATA backplane w/ SES-II System Cooling Fans 6x 80mm 6500 RPM fans   Power Supply Redundant 1400W high-efficiency power supply with PMBus AC Input 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp DC Output +5V standby 6 Amp DC Output +12V 100 Amp @ 100-140V 117 Amp @ 180-240V With Power Distributor +5V: 30 Amp +3.3V: 25 Amp -12V: 0.6 Amp Certification   Gold Certified   [ Test Report ]   PC Health Monitoring CPU Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, sVBAT, HT, memory, chipset CPU switching voltage regulator FAN Up to 9-fan status tachometer monitoring Up to nine 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control  (4-pin fan only) Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 9x fan connectors I2C Temperature Sensing Logic LED CPU / System Overheat LED +5V Standby Alert LED Other Features Chassis Intrusion Detection Chassis Intrusion Header   Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature:    10°C to 30°C (50°F to 86°F) Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)

Manufacturer Motherboard Specification:

Physical Stats Form Factor SWTX Dimensions 16.48" x 13" (41.9cm x 33.0cm)   Processor/Chipset CPU Quad 1944-pin Socket G34 Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support Chipset AMD SR5690/SR5670/SP5100 Chipset   System Memory Memory Capacity 32 DIMM sockets Supports up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs Quad channel memory bus For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix Memory Type Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB, 8GB, 16GB, 32GB Memory Voltage 1.35V or 1.5V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices SATA AMD SP5100 (RAID 0, 1, 10) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC Network Controllers Intel® 82576 controller, Dual-Port   Gigabit Ethernet 10/100/1000BASE-T support VGA Matrox G200 16MB DDR2 graphics Super I/O Winbond® W83527 chip   Input / Output SATA 6x SATA2.0 (3Gb/s) Ports LAN 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI USB 7x USB 2.0 ports 2x Rear, 4x internal header, and 1x type A VGA 1x VGA port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Ports 1x Fast UART 16550 serial port 1x serial port header Others 1 SATA DOM power connector, TPM header   Expansion Slots PCI-Express 2 PCI-E 2.0 x16 1 PCI-E 2.0 x8 1 PCI-E 2.0 x8 or 1 UIO slot

System BIOS BIOS Type 16Mb SPI Flash ROM with AMI® BIOS BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3   Management Software IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III Power Configurations ACPI Power Management Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery   PC Health Monitoring CPU Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset CPU switching voltage regulator FAN Up to 9-fan status tachometer monitoring Up to nine 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control  (4-pin fan only) Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 9x fan connectors I2C Temperature Sensing Logic LED CPU / System Overheat LED +5V Standby Alert LED Other Features Chassis Intrusion Detection Chassis Intrusion Header   Operating Environment / Compliance RoHS RoHS Compliant 6/6, Pb Free Environmental Specifications Operating Temperature:    10°C to 35°C (50°F to 95°F) Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)

VAT @  20% INCLUDED IN PRICE - VAT INVOICE PROVIDED£400.00 Excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK