Shocks Absorbers Struts Compatible with 1998-2002 for Honda Passport,1998-2000 for Isuzu Amigo,2002-2004 for Isuzu Axiom,1998-2004 for Isuzu Rodeo with 344299 344298 Auto Shocks Kits

Left, Right, Front Rear

Step 1: Before you lift the vehicle, loosen lug nuts one full turn.

Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.

Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help

keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt.

Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.

Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need

replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).

Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!

Opening brake lines will require bleeding of the brake system.

Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in

expensive and time consuming repairs.

Step 7: Remove sway bar attached to the strut assembly or control arm.

Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).

Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor

may need to be removed to gain access.

Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the

center retaining nut! It is not safe to unload the spring from the assembly in this position.

Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down

on your brake line, rotor or drum.

Step 12: Install the new Complete Strut Assembly in the reverse order as above (steps 11-6). Using an anti-seize

compound on all fasteners is suggested.

Step 13: Carefully double check your work and make sure everything is tightened to manufacturers torque specifications.

Step 14: Replace the tire the rotor and tighten to manufacturers torque specifications.

Step 15: Slowly lower the vehicle down after removing the jack stands. Pay very close attention to any odd sounds

when the vehicle is lowered onto the new Complete Strut Assemblies.

Step 16: It is very important that you immediately "road test" your vehicle right away to ensure that installation was done properly.

Listen and feel for common signs of incorrect installation while driving slowly over speed bumps, rough road or potholes.

Feature:

Seller Guarantee

100% Bran-new and Good Quality

Item Located: United State

Handling time: 3 working Day

30 Days Money Back + 1 Years Warranty                                                                                                                                                      WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

We stand behind every product we sell.

All of our brand new items come with a 60-Days money-back guarantee.

We define the item as defective only if it doesn't function as described.

It is the buyer's responsibility to understand the item description before bidding.

We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.

 

We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.

 

Shipping & handling cost are not refundable.

Man-made damage by  abuse or wrong operation is not covered by this warranty.

No  product liability insurance is assumed.

Product will be shipped within 3 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most  of countries.

All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.

We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.

The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).

We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

 

2. It is impossible to address issues if we do not know about them!

O.E. Quality, TS16949 certified ABOUT LIFETIME LIMITED WARRANTY

a) Must buy in pairs/sets and install by certified repair center.

b) After installation, an four-wheel alignment must be performed to ensure shocks lifetime not effect by chassis.

1. WHAT IS COVERED BY THIS WARRANTY?

a) This warranty covers defect in material and workmanship.

b) Qualified warranty claims will receive FREE PRODUCT REPLACEMENT in the form of a product exchange.

c) We will cover shipping expense to get the replacement product to the customer

2. WHAT IS NOT COVERED BY THIS WARRANTY?

a) Return defective part Postage is not included.

We recommend buyer use a shipping method that provides tracking and insurance

b) Additional expense such as labor claims

3. PROCEDURE FOR MAKING A WARRANTY CLAIM

a) Contact us through eBay messages with a valid email address And let us know the issue

b) Provide the defective pictures/videos to verify

c) Return to exchange via trackable shipping method, and we will ship the new replacement within 24 hours                      

Warranty claims will not be honored for products that: 

(a) are worn, but are not defective. (An example is where only one unit is defective and the consumer requests a pair be replaced.)

(b) do not qualify due to the expiration of the warranty time duration specified above for each product

(c) installed on non-cataloged applications

(d) are improperly installed, modified or abused

(e) are installed on vehicles for commercial or racing purposes