100-240V Leathercraft Electric Edging
Creasing Machine Iron Replace Tip Tool Set
AC 100 - 240V 50/60Hz
We sell only high quality tools!
Excellent price!
Excellent quality!
Equal to or better than similar store brand-name!
M5 Thread Standard Screw Connector
Material: Brass
Diameter: 8mm (0.32"), Length: 20mm (0.8").
M5 Thread Standard Screw Connector,Fully Compatible With All French
Style Electric Edging & Creasing Machine Heating Element Body,
Such As Regad, Adece, Hermes etc.Machines & Handles.
>> Multiple interchangeable mini pressing creasing heads tips share
a single heating element, which greatly reduces your costs.
>>With the same spending you can buy more kinds of edging creasing pressing tools.
>> According to different needs, the head can be replaced at any time, which
is very convenient for your use.
>> Mirror polishing allows the tool to minimize resistance
to leather, protecting the leather. Do not block the line of sight.
Suggestion:
Use Electric Edging & Creasing Machine soldering iron, the line will not
rebound,the effect will be better,you can create edge marks on other soft
leathers that are tough to mark. Not heated, direct to use, the line will die
away after a long time.
>>>There are a lot of ways of using electric creasing & edging machine in leathercraft.
With heating irons it is easy to polish leather surfaces, make professional edge finishing,
paint decorative grooves on leather, make patterns.Our variety of tools allows you to do
a lot of specific work like cutting zipper, welding thread, smoothing watch strap holds.
With heating tips it is easy to work with different types of leather and different shapes
of patterns.
F1 Replaceable Mini Line Press Head Tip
Material: Brass
Diameter: 8mm (0.32"), Length: 20mm (0.8").
Line Width: 0.2mm (0.008")
Distance Between Line To Edge: 0.8mm (0.03")
(Distance is not calculated into the line width)
Description:
The F Type Series Tips are similar to the FN Type Series, but have both a
smaller crease (line width 0.2mm) and smaller rounded crease than the FN Type,
has a more subtle look. These F Tips are creasers with a guided edge that
follow the edge of your leather and makes a beautiful crease on all types of
leather. The F Type irons have two edges - one that rides on the side of
your leather edge, and one that rides on the top of the leather. The iron heats
the wax and paint on the leather's edge, creating a smooth surface. It also
creates a small decorative line on the top of the leather. All irons are made of
brass, are carefully mirror polished allows the tool to minimize
Resistance to leather, protecting the leather.Do not block the line of sight.
FN Type Replaceable Line Press Head Tip
- FN1/FN1.5/FN2/FN2.5/FN3/FN4
1/1.5/2/2.5/3/4mm
M5 Thread Standard Screw Connector
Material: Brass
Diameter: 8mm (0.32"), Length: 20mm (0.8").
Line Width: 1mm (0.04")
Distance Between Line To Edge:
FN1 - 1mm (0.04")
FN1.5 - 1.5mm (0.06")
FN2 - 2mm (0.08")
FN2.5 - 2.5mm (0.1")
FN3 - 3mm (0.12")
FN4 - 4mm (0.6")
(Distance is not calculated into the line width)
G Type Groove Line Press Replaceable Mini Head Tip
- G1/G1.5/G2/G2.5/G3/G4
1/1.5/2/2.5/3/4mm
M5 Thread Standard Screw Connector
Material: Brass
Diameter: 8mm (0.32"), Length: 20mm (0.8").
Line Width: 0.6mm (0.02")
Distance Between Line To Edge:
G1 -1mm (0.04")
G1.5 - 1.5mm (0.06")
G2 - 2mm (0.08")
G2.5 - 2.5mm (0.1")
G3 - 3mm (0.12")
G4 - 4mm (0.6")
(Distance is not calculated into the line width)
Description:
The G Type Series Tips can press out an arc face between line and
edge, similar to the GN Type Series, but have both a smaller crease
(line width 0.6mm) than the G Type,has a more subtle look.
These G Tips are creasers with a guided edge that follow the edge of your
leather and makes a beautiful crease on all types of leather. The G Type irons
have two edges - one that rides on the side of your leather edge, and one that
rides on the top of the leather. The iron heats the wax and paint on the leather's
edge, creating a smooth surface. It also creates a small decorative line on the
top of the leather. All irons are made of brass, are carefully mirror
polished allows the tool to minimize resistance to leather, protecting the leather.
Do not block the line of sight.
A Type Replaceable Mini Press Groove Line Head Tip
- A1.5/A2/A2.5/A3/A4
1.5/2/2.5/3/4mm
M5 Thread Standard Screw Connector
Material: Brass
Diameter: 8mm (0.32"), Length: 20mm (0.8").
Groove Width: 1.6mm (0.06 ")
5kinds Line Width:
A1.5 - 1.5mm (0.06")
A2 - 2mm (0.08")
A2.5 - 2.5mm (0.1")
A3 - 3mm (0.12")
A4 - 4mm (0.16")
(groove width is not calculated into the line width)
This tool is used to press out a wider groove.
Used to use chisel pricking iron and suture.
>> For making a groove on the edges of leather.
>> Creasers with a guided edge that follow the edge of your leather
and makes a beautiful crease on all types of leather.
>> Mirror polishing allows the tool to minimize resistance
to leather, protecting the leather.
>> It will make a nice border following the contour of your leather.
>> The edger produces a clean groove to follow with your stitches.
>> Do not block the line of sight.
L Type Wide Side Press Replaceable Mini Head Tip
- L2/L3/L4/L5
2/3/4/5mm
M5 Thread Standard Screw Connector
Material: Brass
Diameter: 8mm (0.32"), Length: 20mm (0.8").
B2/B3/B4/B5
L2: Line Width (spacing): 2mm (0.08")
L3: Line Width (spacing): 3mm (0.12")
L4: Line Width (spacing): 4mm (0.16")
L5: Line Width (spacing): 5mm (0.2")
Description:
L type series wide side creasing tips are pressers with a guided edge
that follow the edge of your leather, Can press a stepped shape wide
decorative side on the edges of leather. It will make a nice border
following the contour of your leather. The edger produces a clean side
to follow with your stitches. Mirror polishing allows the tool to minimize
resistance to leather, protecting the leather.
You can also use a wax, paraffin or dye to finish the leather edge.
This iron melts any type of compounds for finishing leather surfaces
providing a great professional-looking result.
Wax Oil Spatula Replaceable Mini Head Tip
M5 Thread Standard Screw Connector
Material: Brass
Connecting Rod Diameter: 8mm (0.32")
Length: 20mm (0.8")
Thickness: 3mm (0.12")
Description:
The wax spatula is used to finish the edge of you leather
with wax, paraffin or blended edge paint. This is specialized
tool for working with waxed surfaces. It evenly melts your
compound into the leather providing a beautiful professional
finish.You can also used tosharping & remove leather burrs.
If you work with waxed surfaces we strongly recommend
you to add this indispensable tool into your collection.
All irons are made of brass and are carefully
Polished before being fitted with their heating resistance.
These accessories are screwed directly into Connecting Rod.
AC 100-240V Electric Edging & Creasing Machine
AC100-240V 50/60Hz International Version
Suitable for All Countries Power Supply
Ten-step temperature control
6 seconds fast heat
30 seconds constant temperature
Black Walnut Wood Shell
Frosted Paint
This electric creasing & edging tool is a very popular product for master luxury
brand craftsmen creating their iconic creased and polished edges.This machine
will substantially reduce the amount of time you spend on your edges and will
give your projects a polished high-end look. Accessories that are made to last.
FOR SALE:
Brand new electric creasing & edging machine
No handles, no rests, no tips included. machine only.
User’s Manual
AC 100 - 240V 50/60Hz International Version
Model Machine Apparatus
Removable 1.5m (4.9ft) power cable supply flex with International plug.
3-Pin Female Cable Connector
(Male Plug Diameter: 25mm , Female Jack Diameter: 25mm)
Specification:
1 LV output with 0V to 18V electronic controller. 3A 48VA.
Electric Heating Head Temperature: 0-400°C
Machine Case Size: 173x131x98mm
(6.8”x5.2”x3.9”)
Width: 131 mm (5.2”)
Depth: 173mm (6.8”)
Height: 98 mm (3.9”)
Weight: about 1500g (3.3lb)
>>>There are a lot of ways of using electric creasing & edging machine in leathercraft.
With heating irons it is easy to polish leather surfaces, make professional edge finishing,
paint decorative grooves on leather, make patterns.Our variety of tools allows you to do
a lot of specific work like cutting zipper, welding thread, smoothing watch strap holds.
With heating tips it is easy to work with different types of leather and different shapes
of patterns. For example, Burnishing Plate you can use while burnishing thick leather
edges, C series is used while creasing round leather corners, S,FN series irons generally
is used while creasing tight curves.
>>>Electric creasing & edging machine tools are time-saving tools, which allow you to do The
work much faster and with higher quality. You just need to turn on the Machine, which
regulate the power, attach the handle to this machine and screw the iron into handle.
Regulate the power presicely to material you use and you can start working. Leather
Burning Machine. This apparatus transfers power and regulates the handle temperature.
You can use only one handle while working the machine. The handle heats the iron.
>>>There is “on-off” power switch button and one LV output with 0 V to 16V electronic
controller on the front panel. Machine comes with removable but durable 1.5m (4.9ft)
Power cable. This is a reliable well-made electric edging and creasing machine.
Instructions for use:
--Preparing the unit for use
--Connect handle to low voltage apparatus output
--Connect machine to mains supply
--Switch on by pressing the switch button at the front panel
--Regulate the power presicely to material you use
--Start using
--Switching off the unit and changing the tool
--Cut off the power supply using the switch button at the front
--Make sure the tool is cold before unscrewing it
then screw on an other tool
--Switch off the device and when it has cooled down, replace the head.
--Switch unit on start using again.
IMPORTANT:
Before using the machine apparatus, check the indicator light
“On - Off” switch button on the front is on “Off”
Safety Instructions:
Only use this machine with the electrical tools recommended by the supplier.
Do not use this machine for any other purpose. This machine is designed
for use indoors and in dry conditions only. While the machine is on operation,
the tool is hot. Be careful for the handling. When you stop working do not
put the handle with the tool in contact with objects.
1pc 4# Wood Handle
The machine handle does not contain a heating body,
need to install an heating body to use!
The heating body needs to be purchased separately.
Brand new straight wood handle for electric creasing & edging machine.
Handle only. No tips, no rest included.
3-Pin Male Cable Connector
(Male Plug Diameter: 25mm , Female Jack Diameter: 25mm)
Fully compatible with all French Style M8 Screw
Connector of Heating Head Accessory Iron Tips,
such as Regad, Adece Machine Accessory Tips etc.
Material: Wood, Stainless Steel.
Handle Length: 210 mm (8.3”)
Handle Diameter: 26 mm (1”)
Cord Length: 1.5m (4.92ft)
Please Note:
--The 4# handle is fully compatible with 3-Pin female
cable Connector for Creasing & Edging Machines.
(Male Plug Diameter: 25mm , Female Jack Diameter: 25mm)
--Don’t try to plug the handle in wall outlet! The handle can be
Plugged directly into Electric Edging and Creasing Machine only!
--The handle fully compatible with all French Style M8 Screw Connector of Heating
Head Accessory Iron Tips,such as Regad, Adece Machine Accessory Tips etc.
About Handles:
The handle transfers the power from electric edging and creasing machine to
the iron to heat it. Wooden handles are solid and long enough that you can use
your shoulder to guide and push it over tough material. It is very easy and comfortable
to work because they have very flexible long power cords. You can keep your machine on
the big distance from your working place for the best possible operation.
>>>There are a lot of ways of using electric creasing & edging machine in leathercraft.
With heating irons it is easy to polish leather surfaces, make professional edge finishing,
paint decorative grooves on leather, make patterns.Our variety of tools allows you to do
a lot of specific work like cutting zipper, welding thread, smoothing watch strap holds.
With heating tips it is easy to work with different types of leather and different shapes
of patterns. For example, Burnishing Plate you can use while burnishing thick leather
edges, C series is used while creasing round leather corners, S,FN series irons generally
is used while creasing tight curves.
Heater Bar Heating Element Body Head Tip Tool
Please Note, These Iron Tip Fully Compatible With All French Style
M8 Thread Screw Connector Handles & Electric Edging Creasing Machine,
Such As Regad, Adece, Hermes etc. Machines & Handles.
These Accessories Are Screwed Directly Into The Handles.
Material: Stainless Steel & Brass
Total Length of Tool - 60 mm (2.4”)
M8 Thread French Style Screw Connector For Handles.
M5 Thread Standard Screw Connector For Mini Replaceable
Creasing Head.
Fully Compatible With All French Style M8 Screw Connector Handles & Electric
Edging Creasing Machine, Such As Regad, Adece, Hermes etc. Machines & Handles.
>>Multiple interchangeable mini pressing creasing heads tips
share a single heating element, which greatly reduces your costs.
>>With the same spending you can buy more kinds of
edging creasing pressing tools
>>According to different needs, the head can be replaced
at any time, which is very convenient for your use.
9 Storage Holes Wooden Rest Stand For Handle
Material: High Quality Hardwood
Original Wood Color, No Paint, Senior Hardwood,Feel Comfortable!
Length: 150 mm (6”) Width: 60 mm (2.4”)
Height: 40 mm (1.6”)
Round Groove Width: 21mm (0.8”)
Weight: 110g
9 Electric Heating Head Storage Holes:
Diameter: 8.9mm(0.4”), Depth: 12mm(0.5”).
When you work with Electric Creasing & Edging Machine, you
need a place where you can put your handle while the iron is
cooling or heating. The rest can be used as a constant storage
for you handles, 9 electric heating head storage holes for
storage heating head . It’s an easy-to-use and indispensable
tool for your work. It’s made of beautiful wood and You can keep
all types of handles on it.
>>Brand new wooden rest for electric soldering iron handles
used with electric creasing & edging machine.
>>Rest only. No tips, no handles included!
>>This is high-quality wooden rest/stand for all electric
soldering iron handles, include Regad, Adece handles.
AU / UK / US / EU Universal International
Worldwide AC Power Plug Adapter
Surge protection Safety Shutter
Shell Material:
Flame Retardant Environmentally Friendly ABS
Color: White
Conductor Material: Aluminum
Rated Current: 3A-10 (A)
Rated Voltage: 110-250 (V)
Size: 7.3 x5.0 x3.9cm
Net Weight: 77g
International travel power plug for US-UK-Australia-Europe
The all in one can connect your electrical appliance everywhere around the world
Universal World Wide Travel Charger Adapter Plug
Converts power outlet when traveling to other countries
Compact and confortable design
We provide a great number of accessory tips
For all of your leather working needs!
Package Includes:
One AC 100-240V Machine
+ One 4# Handle
+ 1pc Heating Element Body
+ One Rest Stand Tool -9 Storage Holes
+ One International Plug
+ 1pc F1 Tip
+ 6pcs FN Type Tip
- FN1/FN1.5/FN2/FN2.5/FN3/FN4
+ 6pcs G Type Tip
- G1/G1.5/G2/G2.5/G3/G4
+ 5pcs A Type Tip
- A1.5/A2/A2.5/A3/A4
+ 4pcs L Type Tip
- L2/L3/L4/L5
+ 1pc Wax Oil Spatula Tip
As picture show
SHIPMENT
1.We ship to eBay's address ONLY.
2.We ship your orders within 2 business days after the payment cleared.
3.Item shipped from SpeedPAK, CHINA Post Airmail, or SINGAPORE
Post Airmail,reach most of the countries within 7 to 30 days.
Average delivery time:
USA: 7-20 DAYS
CANADA: 15-30 DAYS
U.K.: 12-30 DAYS
MOST EURO COUNTRIES: 15-30 DAYS
AUSTRALIA, NEW ZEALAND: 15-30 DAYS
RUSSIA:20-60 DAYS
BRAZIL: 30-60 DAYS
ISRAEL & MOST ASIAN COUNTRIES:15-30 DAYS
4.Distribution operations time depends on destination and other factors,
it may takes up to 30 days.
If you don't receive the item after 30 days,Please contact us,
we'll investigate and solve the delivery problem.
RETURN
If you are not satisfied when you receive your item,
please return it within 30 days for a replacement or money back.
Please contact me before you return it.
The shipping fees is paid by seller.
PAYMENT
Import duties,taxes and charges are not included
in the item price or shipping charges.
These charges are the buyer's responsibility.
THANKS!