Fuel Level Sender Tank Level Sending Unit Gauge 240-33 ohms For Car Marine Boat

Fuel Level Sender Tank Level Sending Unit Gauge 240-33 ohms For Car Marine Boat

 

 

Gauge Connection:

  • Black: Ground(-)
  • Red: 9-30VDC(+)
  • Blue: signal Input Connect the signal of the fuel sender
  • Yellow: Backlight(+)
  • White: No need connect(If need 240-33ohms, no need connect the white cable, if needed 0-190ohms, please take it to connect the negative)


Sender connection:

  • Brown: Signal output
    Blue: Negative(-)
NOTES: This is a optional listing, please confirm the selected item before placing the order.
 

Description:
  • Suitable for truck, generators/gen set, bus and marine field.
  • Widely used in fuel, waste water.
  • Reed switch, steady output signal.
  • Simple and stronge structure , Advanced corrosion resistance.
  • Long using life, anti-vibration,anti-explosion.
  • High quality fuel level senser.
  • Economical level sensing solution, long service lifespan.
Fuel/Water Level Gauge Specification:
  • Size: dia 52mm
  • Backlight: Red
  • Indicating Range:E- F
  • Working voltage: 9-32V
  • Waterproof rating: IP67
  • Material: Stainless steel
  • Signal: 240-33ohms
  • Working Temperature: -30~+75
  • Storage Temperature: -40~+85
  • Color: White&Silver
Package:
  • 1 x Fuel / Water Level Gauge
  • 1 x Instruction manual
  • 1 x Wiring harness
Sensor Specification:
  • Please attention we have 6 models Level Sensor Length Range for choice:
  • 150mm, 225mm,200mm, 250mm
  • Material: 316 Stainless Steel
  • Protection Rank: IP67
  • Resistance output signal: 240-33 ohm(Standard American)
  • Operational Temperature: -40°F ~ +185°F (-40℃ ~ +85℃)
  • Screw size: M5*16
  • Level Sensor Support Water Level Gauge and Fuel Level Gauge
Package Include:
  • 1 x Sensor
  • 1 x Gasket
  • 5 x Screws
INSTRUCTIONS
  • Blue - Ground
  • Brown- connect to instrument signal line
  • The sensor can not be connected to the power supply, can not be connected to the positive electrode, does not need to be connected to the power supply, it is connected with the gauge signal directly
  • Empty oil level 240 ohm/0ohm
  • Full oil level 33ohm/190ohm
Note:
  • We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
  • Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
PushAuction