1UZFE Lexus Oil Adapter

What we have here is an oil filter adapter that bolts to the side of the lexus/toyota 1uzfe, 2uzfe and the 3uzfe engine blocks.  This product was designed and is manufactured in Phoenix, Arizona, USA.  We originally developed this for the our lexus powered 4runner that we needed a solid remote oil filter relocation adapter for.  We had tired the bolt on spacer that sandwiches between the original housing and the block.  However, that system proved to be very unstable and hard to keep from leaking, not to mention that it would not fit in most applications because of size constraints.  This adapter that we offer is much more adaptable to tighter conforming frame rails.  This eliminates the clearance issues caused by the OEM SC400 and LS400 filter housings. This additional clearance is vital when swapping the 1uzfe it's family of motors into other chassis, such as the AE86 corolla, TE series Corollas, A60 and A70 Toyota Supras, as well as the Nissan S13, S14 and S15 chassis.    

The latest version that we are selling now features 2 oil pressure sensor taps.  This is 1/8 NPT thread.  So you can buy whatever fitting or adapter you need to work with your setup.  We will ship with plugs installed for the guys that are not going to use the port.  That way you can just remove the plug if you are going to need that port. We have also added an engraved flow direction for ease of installation.

This housing is CNC machined out of a billet 6061-T6 aluminum and is pressure tested to 1000 PSI!  It features the factory o-ring grove on the back side that the toyota/lexus filter housing uses and a TOYOTA new o-ring and is included with each adapter.  

The adapter also features PURPLE hard anodize to resist corrosion and gives it a nice look to match accommodating AN fittings.  We also include and install 2, dash 10 straight fitting for your dash 10 oil lines.  The dash 10 fittings can be removed to accommodate whichever AN size you need.  We have designed the adapter to accept dash 8 o-ring boss fittings, which is much superior to pipe thread and pipe thread sealant.  You can buy other size AN adapters to use with larger or smaller lines, as long as they are -8 (1/2") O-ring Boss. 

 We guarantee this product for LIFETIME to be fully functional and not to split or fracture or leak.  The fittings we include and install are high quality Gates brand steel fittings that will not crack or break like the cheaper aluminum ones.  

You will receive the billet adapter, o-ring that seals this adapter to the block, just like factory and the two straight -10 fittings that are threaded in the adapter.  The pictures with the hose end fittings are not included.