Description
Car Auto LED Flashing Light Strobe Controller Flasher Module 2 Ways
1. Working voltage: 12V DC
2. Max.
power: 12V/48W
3. Working temperature: -40 to 50 Celsius
4. Dimension: 46x28x13mm
5. Housing Material: black ABS
6. Flash modes:
a.long light mode
b.4 group lights flash alternately
c.12 group lights flash together
d.alternately flash
e.3 group lights quick flash alternately
f.4 group lights flash together
g.4 group lights flash alternately fisrt, then flash together
h.all lights flash alternately and off
i.all lights flash alternately and off, then flash and off together
j.all lights flash and off together
Using method:
1. Connect cable with strobe controller.
In order to prevent poor contact, please connect the cable carefully.
2. About the red & black cable (about 1.2m length): connect the red
cable with positive electrode of power, and black cable with negative
electrode.
3. About black white & black cable (about 3m length), 2 pcs, black
white cable connect with light positive electrode, and black cable with
negative electrode.
4. Turn on the input power, press strobe controller MODE button for 2
to 3 seconds to launch this controller.
Short press MODE button to change flash modes.
5. Avoid water and solarization
With fixed sticker for the strobe controller and LED indicator on the
controller
This is 2 way strobe controller
1 x Strobe controller
1 x Cable bundle
1 x Paster
Car Auto LED Flashing Light Strobe Controller Flasher Module 2 Ways
1. Working voltage: 12V DC
2. Max.
power: 12V/48W
3. Working temperature: -40 to 50 Celsius
4. Dimension: 46x28x13mm
5. Housing Material: black ABS
6. Flash modes:
a.long light mode
b.4 group lights flash alternately
c.12 group lights flash together
d.alternately flash
e.3 group lights quick flash alternately
f.4 group lights flash together
g.4 group lights flash alternately fisrt, then flash together
h.all lights flash alternately and off
i.all lights flash alternately and off, then flash and off together
j.all lights flash and off together
Using method:
1. Connect cable with strobe controller.
In order to prevent poor contact, please connect the cable carefully.
2. About the red & black cable (about 1.2m length): connect the red
cable with positive electrode of power, and black cable with negative
electrode.
3. About black white & black cable (about 3m length), 2 pcs, black
white cable connect with light positive electrode, and black cable with
negative electrode.
4. Turn on the input power, press strobe controller MODE button for 2
to 3 seconds to launch this controller.
Short press MODE button to change flash modes.
5. Avoid water and solarization
With fixed sticker for the strobe controller and LED indicator on the
controller
This is 2 way strobe controller
1 x Strobe controller
1 x Cable bundle
1 x Paster
