Advanced Battery Management System: Our Hypery LiFePO4 batteries are equipped with advanced built-in Battery protection circuit board with integrated battery management system (BMS) and safety switch. The BMS system can protect it from over charge and discharge, over current, short circuit, as well as low and high temperature helping to maintain a long battery life. If dangerous values are exceeded, the system interrupts the power supply, and restarts automatically once the problem is solved to avoid damaging the battery.
Small Size and Ligh Weight: Our 12.8V LiFePO4 batteries is only 1/3 the weight of traditional AGM battery. The deep cycle lifepo4 battery has a sturdy build and is very compact, its small size makes it perfect for various projects.
10 Years Life & 4000+ Cycle: Hypery 12.8V LIFEPO4 battery build-in high denesity 3.2V Lithium Iron Phosphate cell, can be recycled more than 4000 times, which is more than eight times that of lead-acid batteries (300-400 times). The service life can reach 10 years under ideal conditions. Due to its low self-discharge rate the battery will be fully ready for operation even after a year of storage.
3X Faster Charging Time: You can charge this 12.8V lithium-ion battery pack from zero to 100% full in 2 hours. It is 3 times faster charging time than the traditional SLA battery. If you use a quick charger, only half hour is needed to fully charge.
Supports Bluetooth Connection: With the built-in Bluetooth module, you can easily monitor your battery's status more accurately and conveniently in real-time.---- (Only for 200Ah batteries)
Safer Energy And Durable Battery: Environmentally friendly without acid liquid. Non-toxic, not contain harmful substances and not threaten the environment and your health. Robust ABS casing provides excellent impact resistance and toughness.
Wild Application: Our Batteries can be used in the following areas: home energy storage system, caravan, solar, marine, UPS backup, lighting, digital cameras, portable TV, e-Robot, electric vehicles, DIY loud speaker, air pump, fish finder, golf car, trolling motor, motorhome/RV & camper, houseboat, travel trailer, dump trailer and off-grid application.
Voltage: 12.8V
Standard Capacity: 200Ah/2560Wh
Battery Cell Type: Lithium Iron Phosphate
BMS-Discharge Protection Voltage: 10V
Max. Continuous Discharge Current: 200A
Discharge Temperature: -20°C -60°C
Charging Temperature: 0°C -55°C
Max Discharge Current: 350A(5s)
Terminal Type: M8
Protection Rating: IP65
Standard Charging Current: 100A
Recommended Charging Voltage: 14.4V-14.6V
Net Weight: 19KG
Size: 345*190*245mm (13.6* 7.48* 9.6 inch)
Resistance: ≤ 10mΩ
Supports Bluetooth Connection: Yes
Built-in Battery Management System (BMS)
150AH Battery Specifications:
Voltage: 12.8V
Standard capacity: 150Ah / 1920Wh
Battery cell type: lithium iron phosphate
BMS Discharge Protection Voltage: 10V
Standard continuous discharge current: 75A
Max. continuous discharge current: 150A
Discharge Temperature: -20℃ - 60℃
Charging Temperature: 0°C - 55°C
BMS discharge shutdown current: 200A/10s
Maximum discharge current: 350A(5s)
Terminal Type: M8
Degree of protection: IP65
Standard charging current: 75A
Maximum charging current: 150A
Recommended charging voltage: 14.4V-14.6V
Net weight: 15kg
Size: 328.5*172.5*214mm
Resistance: ≤ 10mΩ
LCD Display: Yes
Built-in Battery Management System (BMS)
Voltage: 12.8V
Standard Capacity: 100Ah/1280Wh
Battery Cell Type: Lithium Iron Phosphate
BMS-Discharge Protection Voltage: 10V
Max. Continuous Discharge Current: 100A
Discharge Temperature: -20°C -60°C
Charging Temperature: 0°C -55°C
Max Discharge Current: 350A(5s)
Terminal Type: M8
Protection Rating: IP65
Standard Charging Current: 50A
Recommended Charging Voltage: 14.4V-14.6V
Net Weight: 11.55KG
Size: 328.5*172.5*214mm
Resistance: ≤ 10mΩ
Built-in Battery Management System (BMS)
Voltage: 12.8V
Standard Capacity: 50Ah/640Wh
Battery Cell Type: Lithium Iron Phosphate
BMS-Discharge Protection Voltage: 10V
Max. Continuous Discharge Current: 50A
Discharge Temperature: -20°C -60°C
Charging Temperature: 0°C -55°C
Max Discharge Current: 150A(5s)
Terminal Type: M6
Protection Rating: IP65
Standard Charging Current: 25A
Recommended Charging Voltage: 14.4V-14.6V
Net Weight: 5.7KG
Size: 223*135*182mm
Resistance: ≤ 10mΩ
Built-in Battery Management System (BMS)
30AH Battery Specifications:
Voltage: 12.8V
Standard capacity: 30Ah / 384Wh
Battery cell type: lithium iron phosphate
BMS Discharge Protection Voltage: 8V
Standard continuous discharge current: 15A
Max. continuous discharge current: 30A
Discharge temperature: -20°C - 60°C
Charging temperature: 0°C - 55°C
BMS discharge shutdown current: 40A (1s)
Maximum discharge current: 40A (1s)
Terminal Type: M6
Degree of protection: IP65
Standard charging current: 15A
Maximum charging current: 30A
Recommended charging voltage: 14.4V-14.6V
Net weight: 3.65kg
Size: 223*95*175mm
Resistance: ≤ 10mΩ
Built-in Battery Management System (BMS)
20AH Battery Specifications:
Voltage: 12.8V
Standard capacity: 20Ah / 256Wh
Battery cell type: lithium iron phosphate
BMS Discharge Protection Voltage: 8V
Standard continuous discharge current: 10A
Max. continuous discharge current: 20A
Discharge temperature: -20°C - 60°C
Charging temperature: 0°C - 55°C
BMS discharge shutdown current: 30A (1s)
Maximum discharge current: 30A (1s)
Terminal Type: M5
Degree of protection: IP65
Standard charging current: 10A
Maximum charging current: 20A
Recommended charging voltage: 14.4V-14.6V
Net weight: 2.3kg
Size: 181*77*170mm
Resistance: ≤ 10mΩ
Built-in Battery Management System (BMS)
Warm Tips
1. Please use 14.4V - 14.6V battery charger to charge the battery before use.
2. This battery could NOT be used as an engine starter battery.
3. This battery could NOT be used as a jump start battery.
Frequently asked Questions:
1. Can this battery be charged with a lead-acid battery charger?
We recommend our customers to use a professional LiFePO4 battery charger to recharge it. A lead-acid charger is unable to fully charge a LiFePO4 battery.
2. Can this LiFePO4 batteries be connected in parallel or in series?
Theoretically yes, but please make sure to fully charge the batteries and all batteries are at same voltage level before using them in series or parallel. We do not recommend mixing series and parallel.
3. What should I do if the battery cannot be charged and cannot be used?
Our battery BMS has multi-protections to ensure safety: Short-circuit Protection, Over-current Protection, Overload Protection, Over-voltage Protection, Over-charge Protection and Over-discharge Protection. Once a protection triggered, the battery will be unusable temporarily.
WHAT TO DO When the BMS has shut the battery off for protection:
If the battery cannot recover by itself, try activating by normal charging method such as solar panel, inverter-chargers, AC charger, even a lead-acid battery.
If disconnected due to low voltage, the charging voltage should be 14.0 volts or higher for the BMS to switch on again, such as an AC charger
Specifications For 10A Charger:
Charging voltage: 14.6 V
Charging current: 10 A
Input Voltage: 100-240V
Input Current: 1.8A
Size: 224*94.32*52.3mm
Weight: 775g
Fit Model: LiFePO4 battery over 20Ah
Storage temperature: -10 ℃ to +40 ℃
LED indicators:
Red: Charging; Green: Fully charged.
Specifications For 20A Charger:
Charging voltage: 14.6V
Charging current: 20 A
Input Voltage: 180-240V
Input Current: 2.0A
Size: 224*94.32*52.3mm
Weight: 985g
Fit Model: LiFePO4 battery over 40Ah
Storage temperature: -10 ℃ to +40 ℃
LED indicators:
Red: Charging; Green: Fully charged.