BR502 6V 12V 24V Car Battery Tester

1.Works on 6V 12V 24V batteries, battery ratings from 100 - 2200 CCA,including starter and alternator.

2.Reverse connection protection, even positive and negative are inversely connected, you still no need to worry about battery damage.

3.Test result: SOH, SOC, CCA value, CCA rating, voltage,etc.

4.If the clip is not properly clamped,the screen will flicker,just re-clamp it.Clip properly clamped screen will not flicker. Perfect for beginner

Know your battery conditions in advance before it dies!

☆Plug and play: Press button to switch battery type and press ok button to confirm.Then input the rated battery capacity,BM550 will start analyzing the battery

☆Use TE503 to see whether your car battery is OK.
   Good:The battery is in good condition, feel free to use.
   Normal: General state of the battery may continue to use.
   Poor: The battery is in poor condition, please replace it in time .

Performance：

【Car Battery Tester】 BR502 can test all 6V/12V/24V 100-2000CCA batteries including regular flooded, A flat plate, A spiral, or gel batteries. Provide overall analysis of batteries’ health and help you know its status in advance before it dies. The test results based on CCA Standard. 

【Display Extensive Batteries Data】Battery analyzer applied with the latest conductivity method to measure, the tester will scan the battery and give you an accurate test result in. Including internal Resistance Test,Voltage Test,status of Healthy ( SOH), status of charge (SOC) and CCA value test. 

【Fast and >99.6% Accuracy】With the bulit-in intelligent microprocessor which makes test fast and accurate, compared with the US Midtronics. the accuracy rate is as high as 99.5%.At the same time, the test results can be displayed within two seconds. 

【Plug and Play】 BR502 Battery load analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries. Just connect the tester’s clips with battery then it will turn on and ready to test and analyze battery. It’s that easy! 

【Safty and Protection】Deigned with polarity reverse connection protection.If the positive and negative poles are reversed, it won't damage the device or affect the car or the battery.

FUCTION:

1.Work on 6V 12V 24V Batteries

Perfect for: Cars, SUVs, Pickups, Boats, Motorcycles, Trucks and Golf Carts and more

2.SOH Test

Display state of health, the readable analysis results on 1.8 inch blacklit screen

3.SOC Test - Display state of charge

High precision amplifier and calibrated by professional instruments give you the reliable results in seconds!

4.R(Internal Resistance)

An easy way to analyze the battery cell health status

5.VOL(Battery Voltage)

Over-voltage, short circuit and spark proof protection. Don't need to worry about battery and equipment damage

6.In -Vehicle & Out-of-Vehicle

Support both in-vehicle and out-of-vehicle tests, no need to remove the battery from the vehicle. provide you with more accurate test results quickly, thus replacing the bad cell in time.

Features:

1. Identify battery status Good or Replace

2. Check Battery Capacity - Cold Cranking Amps (CCA), BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB information relative to battery rating.

3. Check Internal resistance value (Ohm)

4. Display battery life in percentage (%)

Package including: 1pc × BR502 Car Battery Analyzer Main Unit