Product Details
Product features:
1. Excellence in detail
2. Large blue film full-view LCD screen, 360 degrees without dead angle
3. Full-screen parameter display is simple and clear to select as required
4. The installation is more firm and durable: the three-point buckle design of reinforced nylon material is elastic and firm without breaking
5. The material is exquisite and comfortable
6. Backlight control: the backlight can be turned on or off by pressing the button briefly, and the backlight status will be automatically saved after power failure
1. Excellence in detail
2. Large blue film full-view LCD screen, 360 degrees without dead angle
3. Full-screen parameter display is simple and clear to select as required
4. The installation is more firm and durable: the three-point buckle design of reinforced nylon material is elastic and firm without breaking
5. The material is exquisite and comfortable
6. Backlight control: the backlight can be turned on or off by pressing the button briefly, and the backlight status will be automatically saved after power failure
Product specification:
Product model: PZEM-022
Optional specification: 5A 10A 100A
Optional version: Russian/Japanese
Optional transformer specification: 100A closed CT/100A open CT
1. Power:
Working voltage: 80~260VAC
Test range 0~2200W, starting power 0.5W
<10W display format 1.00~9.99W
<100W display format 10.0~99.9W
<1000W display format 100~999W
<10000W display format 1.00~9.90kW
≥ 10000W display format 10.0~22.0kW
2. Energy consumption:
Test range 0~999kWh
<1kWh display format 0~999Wh,<10kWh display format 1.00~9.99kWh
≥ 10kWh display format 10~999kWh
3. Voltage:
Test range 80~260V
Display format 80~260V
4. Current
Test range 0~100A, starting current 0.02A
<10A display format 0.000~9.000A, ≥ 10A display format 10.00~99.99A
5. Frequency
Test range 45~65Hz
Display format 45~65Hz
6. Power factor:
Test range 0~1PF
Display format 0.00~1.00PF
Product model: PZEM-022
Optional specification: 5A 10A 100A
Optional version: Russian/Japanese
Optional transformer specification: 100A closed CT/100A open CT
1. Power:
Working voltage: 80~260VAC
Test range 0~2200W, starting power 0.5W
<10W display format 1.00~9.99W
<100W display format 10.0~99.9W
<1000W display format 100~999W
<10000W display format 1.00~9.90kW
≥ 10000W display format 10.0~22.0kW
2. Energy consumption:
Test range 0~999kWh
<1kWh display format 0~999Wh,<10kWh display format 1.00~9.99kWh
≥ 10kWh display format 10~999kWh
3. Voltage:
Test range 80~260V
Display format 80~260V
4. Current
Test range 0~100A, starting current 0.02A
<10A display format 0.000~9.000A, ≥ 10A display format 10.00~99.99A
5. Frequency
Test range 45~65Hz
Display format 45~65Hz
6. Power factor:
Test range 0~1PF
Display format 0.00~1.00PF
Product function:
1. Backlight control:
The backlight can be turned on or off by short pressing the button, and the backlight status will be saved automatically after power failure.
2. Power reset:
Step 1: Press and hold the key for 5 seconds until the power digit flashes, and then release the key;
Step 2: If you press the key again, the power data will be reset and the reset flashing state will exit; Step 3: If there is no key action within 5 seconds, it means that the power data is not reset and the reset status is exited.
3. Power alarm value setting:
Step 1: Press and hold the key for 3 seconds until the screen displays "SET CLr", then release the key to enter the power alarm value setting state;
Step 2: The current power alarm value is displayed in the power area and the lowest digit starts to flash. At this time, the digit can be+1 by pressing the key briefly. When there is no key operation for more than 3 seconds, the digit will be automatically switched. The setting method is the same as above;
Step 3: After setting, press and hold the key for more than 5 seconds to automatically save and exit. The range of active power threshold setting is 0.0~22kW
1. Backlight control:
The backlight can be turned on or off by short pressing the button, and the backlight status will be saved automatically after power failure.
2. Power reset:
Step 1: Press and hold the key for 5 seconds until the power digit flashes, and then release the key;
Step 2: If you press the key again, the power data will be reset and the reset flashing state will exit; Step 3: If there is no key action within 5 seconds, it means that the power data is not reset and the reset status is exited.
3. Power alarm value setting:
Step 1: Press and hold the key for 3 seconds until the screen displays "SET CLr", then release the key to enter the power alarm value setting state;
Step 2: The current power alarm value is displayed in the power area and the lowest digit starts to flash. At this time, the digit can be+1 by pressing the key briefly. When there is no key operation for more than 3 seconds, the digit will be automatically switched. The setting method is the same as above;
Step 3: After setting, press and hold the key for more than 5 seconds to automatically save and exit. The range of active power threshold setting is 0.0~22kW
Package list:
1* PZEM-022 DC voltage current power capacity meter
- EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.