■■■Product■■■
Ibanez electric guitar Prestige AZ24047 Black made in JAPAN
*There are multiple identical products.
Therefore, the serial number may differ from the photo.
【condition】: NEW 【version】:Japanese
It will be the ultimate all-lander model "AZ" model created by pouring everything Ibanez has cultivated so far from "A to Z".
This AZ is a model for players who want all the techniques, fusion of various music styles such as rock, metal, blues, jazz, and fusion.
Since the release of the 6-string model, it has high playability, abundant tones, a wide range, and scenes.
The development to his 7-string model, which has the ability to respond to any choice, is not only for metal but also for various genres as a voice of craving.
I heard from a guitarist.
Driven by their voice, in 2021, Ibanez launches his two AZ 7 models as a pioneer of multi-string guitars.
It puts in the know-how for developing and manufacturing multi-string guitars cultivated for nearly 30 years, and also created his AZ.
It can be said that his 7-string guitar is a new frontier, packed with the resources, specs, and rules of thumb obtained in.
This model is a popular prestige series due to the good quality unique to domestic products.
The thinly finished body contour reminiscent of the flagship model S and the original shape body with a large elbow contour greatly contribute to improving playability.
In addition, the front side of the body is R3mm and the back side is R8mm, and the R angle is changed on the front and back, so the fit when holding the guitar is excellent regardless of sitting / standing.
The material is Alder.
The neck and fingerboard are made of maple with estec treatment.
This estec treatment is a nitrogen heat treatment technology for wood developed in Sendai, and it is the first in the world to be used for guitar materials.
The wood treated with this treatment has the characteristics of shape stability, durability against warpage, water resistance, and resistance to temperature changes.
The neck thickness is 20.5mm on the 1st floor and 22.5mm on the 12th floor.
The neck width is set to 47 mm for the nut and 66 mm for the final fret. It has become.
The finish uses an oil finish with a texture that resembles a struck neck.
The frets are jumbo-sized stainless steel frets.
The brightness of the tone, the smoothness of the tone, and the good rise of the sound are excellent.
It has a higher hardness than normal nickel silver frets and is less likely to wear out.
The pickup is equipped with a Seymour Duncan Hyperion pickup.
This pickup was created in collaboration with Seymour Duncan for exclusive use with this Ibanez AZ model.
We have realized the specifications and sound image that are considered to be optimal for the AZ model.
It is a custom pickup that emphasizes picking followability and reproducibility by suppressing the output so that the cleanliness of the original sound remains somewhere even if it is distorted.
From treble to how the bass 1st to 7th strings sound, we emphasize total balance and pursue the goodness of the effect. The magnet uses Alnico 5.
You can switch to a variety of sound variations with the mini switch between the volume and tone knob.
In combination with this switch, including a mode to wire two single coil pickups in series,
You can create 9 different sound variations.
The bridge is a two-point support floating synchro type bridge developed in collaboration with the long-established domestic brand Gotoh and Ibanez.
A hard cut titanium saddle and a cut steel inertia block are used to achieve both a good sound rise and a solid and fat sound, and it also features a stretchy treble range.
The narrow spacing design with a 10.5mm inter-string pitch pursues the ease of picking across strings required by players who frequently use skipping and hybrid picking.
The peg is equipped with a Gotoh lock type that can adjust the height of the post.
It facilitates string replacement and enhances tuning stability.
-Neck type AZ7 Oval C S-TECH WOOD? Roasted Maple neck
-Body Alder body
-Fretboard S-TECH WOOD ? Roasted Maple fretboard w/Black dot inlay & Luminlay side dot inlay
-Fret Jumbo Stainless steel fretsw/Prestige fret edge treatment
-Bridge Gotoh? T1872S tremolo bridge
-Neck pickup Seymour Duncan? Hyperion?7 (S) neck pickup
-Middle pickup Seymour Duncan? Hyperion?7 (S) middle pickup
-Bridge pickup Seymour Duncan? Hyperion?7 (H) bridge pickup
-Hardware color Chrome
-Case/bag Hardshellcase included
-String gauge .010/.013/.017/.026/.036/.046/.059
Scale:648mm/25.5”
a : Width at Nut:47mm
b : Width at Last Fret:66mm
c : Thickness at 1st:20.5mm
d : Thickness at 12th:22.5mm
Radius:305mmR
■■■About Shipping■■■
We will carefully deliver using the packing material.
In now ,shipping method is only Fedex.
Due to the effects of infectious diseases, cheap flights such as SAL have been suspended all over the world.
At the same time, the shipping cost of international courier services has also been increased.
The shipping cost is high, but please understand the situation.
■■■Shipping Duration■■■
[Fedex]2-7buisiness day
In now ,shipping method is only Fedex.
■■■Payment■■■
You can choose the payment method.
Paypal, credit card, Google Pay, etc.
We ship the item from Japan .
We usually ship the item within 5 business days of receiving payment.
We accept return the only case of unopened item package.
Import duties, taxes, and charges are not included in the item price or shipping cost.
These charges are the buyer’s responsibility.
■■■International Buyers Please Note ■■■
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.